Hard alloy titanium carbide guide wheel - transmission
Titanium carbide hard alloy guide wheels are key guiding components in the production of wire and tube materials. They are made by sintering high-purity titanium carbide and cobalt binder through powder metallurgy. The surface hardness can reach up to HRC88, and the wear resistance is over 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm, ensuring smooth operation of the wire during high-speed drawing (up to 100m/s) and preventing jitter or deviation. In the production of stainless steel wire, using this type of guide wheel can reduce the surface roughness of the wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, one set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of the guide wheels makes them widely used in the tire industry, contributing to enhancing the wear resistance and safety of tires.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Wear-resistant titanium carbide rods - special for mechanical parts | The length of this round bar can be customized according to requirements, ranging from 100mm to 1000mm, and it can undergo secondary processing suc... |
 |
Precision mold coating chromium carbide powder | Chromium carbide powder has outstanding high-temperature oxidation resistance. Its oxidation rate is low below 900℃ in the air, and the formed oxid... |
 |
High-density tungsten carbide round rods | The product is mainly used for heavy machinery gear tunneling of roadheader which plays an important role in improveing boring machine life. It can... |
 |
Large-diameter titanium carbide hard alloy guide wheels | The guide wheel features precisely machined installation holes, with a fit clearance between the shaft and hub controlled within the range of 0.005... |
|
|
Hard alloy titanium carbide guide wheel - transmission | Titanium carbide hard alloy guide wheels are key guiding components in the production of wire and tube materials. They are made by sintering high-p... |
