Hard alloy titanium carbide guide wheel - transmission
Titanium carbide hard alloy guide wheels are key guiding components in the production of wire and tube materials. They are made by sintering high-purity titanium carbide and cobalt binder through powder metallurgy. The surface hardness can reach up to HRC88, and the wear resistance is over 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm, ensuring smooth operation of the wire during high-speed drawing (up to 100m/s) and preventing jitter or deviation. In the production of stainless steel wire, using this type of guide wheel can reduce the surface roughness of the wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, one set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of the guide wheels makes them widely used in the tire industry, contributing to enhancing the wear resistance and safety of tires.
在线联系供应商
Other supplier products
 |
Environmentally friendly chromium carbide powder | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
 |
Titanium carbide TiC ceramic powder | Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. I... |
 |
Customized channel-shaped titanium carbide guide wheels | The guide wheel features high-precision installation holes, with a fit clearance of 0.005–0.01 mm between the holes and the shaft. This ensur... |
 |
Low friction titanium carbide guide wheel | The surface of the guide wheel can be specially treated according to requirements, such as coating with a diamond coating, which further improves... |
 |
Non-standard customized service titanium carbide guide wheel | Titanium carbide carbide guide wheel has a wide working temperature range, -100℃ to 600℃ environment with stable performance, in the production o... |
