Catheter bending resistance tester
Catheter bending resistance tester - Other test instrument - standard
Product Information:
Product introduction
The tester is composed of a programmable controller, a touch screen, a force sensor,
a transmission device, an airborne printer, etc. It provides a menu display in both Chinese
and English, and has a test mode for automatic operation of various parameters set by
man-machine dialogue. Test control range includes: nominal capacity, core rod displacement,
print setting, test, up, down, time, calibration, verification and other function Settings. With
the on-board printed test, the test load and sliding data （starting force, average force,
maximum thrust） can be displayed in real time. Automatically judge the test results, start
the automatic buzzer alarm if unqualified, and print out the test data and results by the printer
for analysis.
Test principle
The loop circumference of the catheter is expressed as the bending length, and the flow
rate of the catheter drainage cavity and the irrigation cavity is measured under the bending
length, so as to reduce the initial flow rate of the corresponding cavity after the flat catheter
is placed by 50%.
Technical parameter
1. Static level height: 1000±5mm, automatic circulation of water pump （adjustable
static water surface）
2. Time controller: 0-- 60min, error is not more than ±1S
3. Fixture: suitable for various catheters
4. Flow calculation: measuring cylinder method
5. Flow rate: >500ML/MIN
6. Overall size: 400×290×240（mm）
在线联系供应商
Other supplier products
 |
System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester | Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq... |
 |
Adiabatic Rate Calorimeter | Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ... |
 |
BBA steady state solar simulator tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo... |
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load ap... |
 |
Midsole Fibreboard Bending Test Machine | Product Introduction: G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, m... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | 卖方: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | 卖方: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | 卖方: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | 卖方: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
