Catheter Balloon Inflation Diameter Tester

• 

Catheter Balloon Inflation Diameter Tester - Other test instrument - standard

Product Information:

Main Uses of the Catheter Cuff Inflated Diameter Tester

The catheter cuff inflated diameter tester is mainly used to measure the diameter of the cuffs of medical devices such as endotracheal tubes and tracheostomy tubes after inflation. This measurement is crucial for ensuring the safety and effectiveness of medical devices during use. By accurately measuring the inflated diameter of the cuff, it can help medical staff determine the appropriate amount of inflation. This aims to effectively seal the airway, prevent gas leakage and the aspiration of secretions into the airway, while also avoiding excessive pressure on the tracheal wall. In addition, this tester also helps to reduce complications such as tracheal mucosal injury, ischemia, and necrosis caused by excessive cuff pressure, improving the safety and effectiveness of endotracheal intubation.

Compliance Standards

ISO5367, YY0337.1 - 2002, GB/T15812.1 - 2005, YY 0321.1 - 2009, YY/T 0321.2 - 2021, YY 0321.3 - 2009, and YY0285.6, etc.

Technical Parameters

The technical parameters of the catheter cuff inflated diameter tester may vary depending on the model and brand, but the following are some common parameter ranges:

- **Testing Range**: Usually, it can cover a pressure range of 0 - 10 kPa or 0 - 1.45 psi to meet the inflation requirements of different cuffs. - **Accuracy**: The tester usually has a high accuracy, such as 0.5%FS (full - scale error), to ensure the accuracy of test results. - **Air Source Pressure**: The air source pressure required by the tester generally does not exceed 0.7 MPa, and the user needs to provide the air source. - **Air Source Interface**: Usually, a Φ8 mm polyurethane tube is used as the air source interface for easy connection to air source equipment. - **External Dimensions**: The main unit and device of the tester usually have a compact design for easy portability and placement. For example, the dimensions of the main unit may be 300 mm(L)×410 mm(W)×150 mm(H), and the dimensions of the device may be 215 mm(L)×215 mm(W)×240 mm(H). - **Weight**: The weight of the tester is usually moderate, about 25kg, for easy handling and operation. - **Testing Principle**: The tester usually adopts the positive - pressure testing principle. It inflates the cuff with a certain amount of air to make it stretch and unfold the wrinkles while minimizing the tension on the cuff wall, and then measures its inflated diameter.

Другие товары поставщика

	High - speed Pellet Impact Testing Machine for Helmet Goggles	High - speed Pellet Impact Testing Machine for Helmet Goggles - Flammability Testing equipment price quotation - standard Standards: SNELL SA/K...
	Carpet Pilling and Fuzzing Tester	Relevant Standards GB/T21196 - 2007, GB/T4802.2, GB/T13775, FZ/T20020, ASTM D4970, ISO12945 - 2, ASTM D4966, ASTM D3886, ISO12947, JIS L10...
	Plate thermal conductivity tester	Introduction:Plate thermal conductivity tester isused to test the thermal conductivity of refractory insulation, ceramic fiber, felt, textile, plat...
	Pump and Valve Contamination Tolerance Tester	Meet the standard: ISO 4406 ISO 18413 ISO 10707 ISO 6403 ISO 10372 NFPA T2.6.1 Product Introduction: Solid particle contamination is a maj...
	Tube Dropping Impact Tester	Tube Dropping Impact Tester - Material and Parts of Automotive - standard Standards: GB / T14152-2001 "Thermoplastics pipes-Determination of re...

Похожие товары

	Briefly describe the importance, core functionality and how to implement a hospital clock system solution	Продавец: California Triangle	In the healthcare industry, precise time synchronization is critical. Every second can be a matte...
	Sand and Dust Test Chamber for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour...
	Automotive Connector SO₂/H₂S Corrosion Test Chamber	Продавец: Standard International Group (HK) Limited	Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio...
	Automotive Connectors Salt Spray Tester	Продавец: Standard International Group (HK) Limited	Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117...
	Air - tightness Testing Device for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes...