Heel Impact Tester
Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes.
Application:
This Heel Impact Tester is used to determine the impact strength of heels of ladies’ shoes, and the result provides an assessment of the liability to failure under the occasional heavy blows received during wear.
Feature：
Its principle is, a heel, clamped with the tip uppermost and the stem approximately vertical, is subjected repeatedly to measured blows from a pendulum striker , the energy of the blows increasing successively until the heel fails. While the method is applicable to all types of high heels ,of whatever construction, it is particularly useful for injection molded plastics heels which incorporate a steel dowel reinforcement, giving information on the suitability of the dowel’s hardness or softness.
parameters：
Capacity: 0~18.3J(13.5FT-LB) minimum indication
Swing arm: φ25mm
Energy of pendulum bob when swing arm in horizontal: 17.3N-m(12.7ft-lb)
Impact hammer: φ108mm, 49.2mm(D)
Distance between hammer circle center and axle center: 432mm
Impact blade: 25x6x35mm(W×D×L),3mm(R)
Specimen seat adjustable range: 0~25mm(H), angle 1~45°
Volume: 63x40x105cm
Weight: 101kg
Standard:
BS-5131-4.8,
ISO 19953,
SATRA TM20
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fiber ratio resistance tester | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Rotary Rubbing Color Fastness Tester (Crockmeter) | Rotary Rubbing Color Fastness Testing Machine (Crockmeter)Application：Rotary Rubbing Color Fastness Testing Machine(rotary color fastness tester) u... |
 |
Thrust Washer Tribological Performance Tester | Applicable standards When the end face rotary friction and wear testing machine is tested, it is usually necessary to follow certain standards and... |
 |
" Helmet Surface Friction Testing Machine" | Purpose The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached wi... |
 |
Single Cable Vertical Flame Tester | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale te... |
Похожие товары
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Продавец: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Продавец: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Продавец: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Продавец: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Продавец: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
