Heel Fatigue Tester
Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.
Application:
The heel fatigue tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.
Procedure：
Clamp the heel on the machine, adjust the height position and angle of the heel according to the equipment, adjust the hammer in the horizontal position, pre-set the number of impacts, start the equipment. The hammer would impact the heel with the specified energy of 0.68J, 60 cycles per minute. Continuous testing until the heel breaks or reaches the specified number of impacts, the equipment automatically stops, and the number of impacts is recorded. This test method is used to assess the resistance of the heel to the repeated impact with certain mass.
Feature：
A heel is subject to blows of specified energy, delivered by a pendulum under a specified frequency, testing continues until failure of the heel takes place or satisfactory fatigue resistance is achieved.
parameters：
Impact Energy：0.68J / blow
Impact Frequency：60 blows /min
Adjustable Range of Base Clamp：90mm (H), 80mm (W), angle 0~180°
Counter LCD：0~999,999
Main unlt：46×46×75cm
Control box：18×21×20cm
Weight：70kg
Power Supply：1∮ AC 220V,3A
Standards:
BS-5131 4.9,
ISO 19956
SATRA TM21,
QB/T2864
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Medical injection needle rigidity tester | Standard GB 18457-2001 This standard mandates precise control over needle wall thickness (normal, thin, ultra-thin) and rigidity performance, dir... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hours ≤28°C); Ambient humidity: ≤85% Tech... |
 |
Strip evenness tester | Product Introduction: Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to... |
 |
Rain Test Chamber | Product Information: This instrument can simulate rain horizontally spraying to the tested sample which is vertically fixed in the stainless steel... |
 |
Safety Helmet Roll-off device | Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh... |
Похожие товары
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Продавец: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Продавец: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Продавец: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Продавец: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Продавец: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
