.

Heel Fatigue Tester

Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.

Application:

The heel fatigue tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.

Procedure:

Clamp the heel on the machine, adjust the height position and angle of the heel according to the equipment, adjust the hammer in the horizontal position, pre-set the number of impacts, start the equipment. The hammer would impact the heel with the specified energy of 0.68J, 60 cycles per minute. Continuous testing until the heel breaks or reaches the specified number of impacts, the equipment automatically stops, and the number of impacts is recorded. This test method is used to assess the resistance of the heel to the repeated impact with certain mass.

Feature:

A heel is subject to blows of specified energy, delivered by a pendulum under a specified frequency, testing continues until failure of the heel takes place or satisfactory fatigue resistance is achieved.

parameters:

Impact Energy:0.68J / blow

Impact Frequency:60 blows /min

Adjustable Range of Base Clamp:90mm (H), 80mm (W), angle 0~180°

Counter LCD:0~999,999

Main unlt:46×46×75cm

Control box:18×21×20cm

Weight:70kg

Power Supply:1∮ AC 220V,3A

Standards:

BS-5131 4.9,

ISO 19956

SATRA TM21,

QB/T2864


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Circular Locus Pilling Tester
Circular Locus Pilling Tester Standard GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory methodJIGBell-type gas flow standard device ve...
Residual Ethylene Oxide Gas Chromatograph
Residual Ethylene Oxide Gas Chromatograph The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica...
Paper and cardboard crease stiffness meter
Paper and cardboard crease stiffness meter Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measure the bending stiffness of paper and cardboard materials w...
Radiant Panel Flame Spread Apparatus
Radiant Panel Flame Spread Apparatus Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas r...
Bone Plates Four-point Bending Fatigue Tester
Bone Plates Four-point Bending Fatigue Tester Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million cycl...
供应产品

Same products

Briefly describe the importance, core functionality and how to implement a hospital clock system solution
Briefly describe the importance, core functionality and how to implement a hospital clock system solution 卖方: California Triangle In the healthcare industry, precise time synchronization is critical. Every second can be a matte...
Sand and Dust Test Chamber for Automotive Connectors
Sand and Dust Test Chamber for Automotive Connectors 卖方: Standard International Group (HK) Limited Operating Conditions: Ambient temperature: 5°C~+28°C (average temperature within 24 hour...
Automotive Connector SO₂/H₂S Corrosion Test Chamber
Automotive Connector SO₂/H₂S Corrosion Test Chamber 卖方: Standard International Group (HK) Limited Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio...
Automotive Connectors Salt Spray Tester
Automotive Connectors Salt Spray Tester 卖方: Standard International Group (HK) Limited Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117...
Air - tightness Testing Device for Automotive Connectors
Air - tightness Testing Device for Automotive Connectors 卖方: Standard International Group (HK) Limited Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes...