Shoelace anti-siphon tester 丨Shoelace Tester

• 

Product Introduction

Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon waterproof performance.

Standards

GB/T 17219

EN 1717

ASTM F2023

ISO 3822-4

Waterproof

Refers to the waterproof agent on the surface of the fabric to form a film, so that water can not penetrate the inside of the fabric is called waterproof.

Anti-siphon can be divided into static anti-siphon and dynamic anti-siphon two categories. Static anti-siphoning is to adopt a static suspension method to observe whether the liquid immersed in the fabric has a climbing phenomenon, and the climbing height to assess whether it is qualified.

Product Advantages

Measures Key Moisture Management Property: Quantifies static wicking or anti-siphon behavior, which is important for footwear comfort and preventing water ingress.

Suitable for Various Materials: Applicable to a range of footwear components and materials, including textiles, leather, and laces.

Simultaneous Testing: Allows testing of multiple samples concurrently (up to 20), increasing efficiency.

Provides Objective Measurement: Measures the actual height of water climb over a specified time.

Simple Test Principle: The static suspension method is straightforward to implement and understand.

Product Features

Stand or rack with multiple stations for vertically suspending test specimens.

Water bath or trough at the base with controlled water level (450mm maximum height capability, although the immersion position is 13mm).

Clips or clamps to hold the upper end of the samples securely on the suspension stand.

Measuring scale or ruler positioned alongside each sample to accurately read the height of water rise.

Capability to test a specific number of samples simultaneously (20 samples).

Designed to accommodate specific sample sizes based on material type (Leather, mesh: 7625MM; Shoelaces, webbing: 76width MM; Line type: 76*width MM).

Designed for testing with a specific immersion position (13mm) and suspension times (0.5 hours and 2 hours).

Technical Parameters

1. Leather, mesh: 76*25MM

2. Shoelaces, webbing: 76* width MM

3. Line type: 76* width MM

4. Samples can be tested at the same time: 20

5. Water level height: 450mm

Другие товары поставщика

	Shoe heat insulation testing machine -- sand bath	Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard for...
	Photocatalysis Illumination Apparatus JIS r1702	Applicable standards: JIS r1702 / New ceramics - Antibacterial activity test and antibacterial effect of antibacterial processed products under li...
	A Bottle Cap Torque Tester	A Bottle Cap Torque Tester is a specialized device used to measure the torque applied to bottle caps during sealing or opening processes. Its prima...
	Desktop Xenon lamp aging test chamber	TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a...
	TTF tensile testing machine / TTF Tensile Tester	Product Introduction: The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys Des...

Похожие товары

	Briefly describe the importance, core functionality and how to implement a hospital clock system solution	Продавец: California Triangle	In the healthcare industry, precise time synchronization is critical. Every second can be a matte...
	Sand and Dust Test Chamber for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour...
	Automotive Connector SO₂/H₂S Corrosion Test Chamber	Продавец: Standard International Group (HK) Limited	Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio...
	Automotive Connectors Salt Spray Tester	Продавец: Standard International Group (HK) Limited	Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117...
	Air - tightness Testing Device for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes...