Shoelace anti-siphon tester 丨Shoelace Tester
Product Introduction
Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon waterproof performance.
Standards
GB/T 17219
EN 1717
ASTM F2023
ISO 3822-4
Waterproof
Refers to the waterproof agent on the surface of the fabric to form a film, so that water can not penetrate the inside of the fabric is called waterproof.
Anti-siphon can be divided into static anti-siphon and dynamic anti-siphon two categories. Static anti-siphoning is to adopt a static suspension method to observe whether the liquid immersed in the fabric has a climbing phenomenon, and the climbing height to assess whether it is qualified.
Product Advantages
Measures Key Moisture Management Property: Quantifies static wicking or anti-siphon behavior, which is important for footwear comfort and preventing water ingress.
Suitable for Various Materials: Applicable to a range of footwear components and materials, including textiles, leather, and laces.
Simultaneous Testing: Allows testing of multiple samples concurrently (up to 20), increasing efficiency.
Provides Objective Measurement: Measures the actual height of water climb over a specified time.
Simple Test Principle: The static suspension method is straightforward to implement and understand.
Product Features
Stand or rack with multiple stations for vertically suspending test specimens.
Water bath or trough at the base with controlled water level (450mm maximum height capability, although the immersion position is 13mm).
Clips or clamps to hold the upper end of the samples securely on the suspension stand.
Measuring scale or ruler positioned alongside each sample to accurately read the height of water rise.
Capability to test a specific number of samples simultaneously (20 samples).
Designed to accommodate specific sample sizes based on material type (Leather, mesh: 7625MM; Shoelaces, webbing: 76width MM; Line type: 76*width MM).
Designed for testing with a specific immersion position (13mm) and suspension times (0.5 hours and 2 hours).
Technical Parameters
1. Leather, mesh: 76*25MM
2. Shoelaces, webbing: 76* width MM
3. Line type: 76* width MM
4. Samples can be tested at the same time: 20
5. Water level height: 450mm
Send product request
Other supplier products
 |
Carbon Black Dispersion Tester丨Carbon Black Dispersion Analyzer | Scope of application: STD DW1431 plastic carbon black dispersion measurement system is based on a professional image acquisition system and corres... |
 |
Shoe Sole Heat Resistance Tester / Shoe Materials Heat Resistance Tester | Reference standard EN ISO 20344. EN ISO 8772-1. GB/T 20991-2007. ANSI, JIS, CSA, GB12017-1989. LD50-1994 and other standards Main uses The sole ... |
 |
Sample machine / Sample Testing Machine | Purpose: The products are suitable for all kinds of textiles, leather, nonwovens and other products in the inspection of samples. Wide application... |
 |
European standard shrinkage testing machine | European Standard Washer | Product Overview TheEuropean Standard Washer(EN 14399-compliant) is a high-performance fastening component designed for industrial and automotive ... |
 |
Safety Footwear Electrical Hazard Tester ISO 8782 | Introduction The safety shoe voltage resistance tester is mainly used to test the voltage resistance of safety shoes under specified conditions, i... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Seller: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Seller: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Seller: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Seller: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Seller: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
