Rubbing Color Fastness Tester/

• 

Standards
BS 1006 D02； ISO 105 D02 X12； AATCC 8 165； GB/T 3920； NEXT TM6 M&S C8 C8A

Application
This instrument is applicable to the test of color fastness in textile, knitwear, leather, electrochemical plate and printing.

Technical Parameter

Test Procedure

1. Sample preparation:
1. 1 The sample and standard small white frictioncloth need to be moisturized in a constant temperature and humidity environment.
1. 2 When the sample has many colors, all colors should be rubbed.
1. 3 if the area of various colors is large enough,take different colored smaple separately.
1. 4 To make dry friction and wet friction, ensure that all colors are rubbed.
1. 5 If the two sides of the sample are made of different materials and colors, the test will be done on both the two sides.
1. 6 Dry and wet rubbing fastness test should not be repeatedly done in the same part of the sample.

2. Dry friction:
2. 1 Place the sample flat on the tester with sandpaper laid on. Make the lengitudinal direction of the specimen consistent with the moving direction of the instrument and fix the sample on the pressing plate, and the sample should be flat.
2. 2 Apply the standard friction cloth to the friction head, tighten with the spring clamp, and place the friction head on the sample.
2. 3 Ensure that the sample has no slip or wrinkle when the friction starts;
2. 4 Put the friction head on the sample. Connect the POWER and press the POWER button. Set test times.
2. 5 Start the test by pressing the START button. When the test number reaches the set value, the instrument automatically stops.
2. 6 Remove the standardwhite friction cotton cloth and compare for rating with the gray card.

3. Wet friction:
3. 1 Completely wet the standard friction cloth in distilled water;
3. 2 Squeeze the friction cotton in the filter paper after taking out, but contain certain water content;
3. 3 The remaining steps are the same as the above dry friction test;

4. Result processing:
4. 1 Before rating, usescotch tapeto gently stick the loose fluff off the white cloth.
4. 2 Place three layers of unused friction white cloth under the white cloth to be assessed, and the color rating of the small white cloth should be evaluated by reference to the standard stained grey scale.

5. Test report:
5. 1 Report standard method
5. 2 Report dry friction and wet friction results respectively.

PRODUCT DISPLAY

Другие товары поставщика

	Geosynthetic Clogging Tester	Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s...
	Air - tightness Testing Device for Automotive Connectors	Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightness of seals or connectors. 2. The positive pressur...
	Internal and external filters	Applicable Standards Both filter types adhere to industry-specific regulations, including: ISO 10526(Standard illuminants for colorimetry, e....
	Horizontal Vertical Combustion Tester	IntroductionHorizontal and vertical combustion testeris to simulate the early situation of a fire around the electrical environment .By simulating ...
	Manual Tear Strength Tester	I. Product Overview TheManual Tear Strength Testeris a precision instrument designed to measure the tear resistance of materials using standardi...

Похожие товары

	Briefly describe the importance, core functionality and how to implement a hospital clock system solution	Продавец: California Triangle	In the healthcare industry, precise time synchronization is critical. Every second can be a matte...
	Sand and Dust Test Chamber for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour...
	Automotive Connector SO₂/H₂S Corrosion Test Chamber	Продавец: Standard International Group (HK) Limited	Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio...
	Automotive Connectors Salt Spray Tester	Продавец: Standard International Group (HK) Limited	Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117...
	Air - tightness Testing Device for Automotive Connectors	Продавец: Standard International Group (HK) Limited	Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes...