Leather Rubbing Colorfastness Tester
Standards
ISO 11640Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing.
SATRA PM 173Reference standard of footwear testing content and methods.
QB/T 2537-2001Leather -- Tests for colour fastness --Colour fastness to reciprocating rubbing.
DIN 4843Safety Footwear; Safety Requirements, Testing
QB/T 2226Shoelace wear test method, light industry standards.
GB/T 20991-7.3Personal protective footwear test method.
Consumables
Friction material:
White wool felt, size 15mm × 15mm. The punched pure wool felt piece should meet the following requirements: pH of water extract between 5.5 ~ 7.0; mass per unit area (1750 ± 100) g / m2, thickness (5.5 ± 0.5) mm.
Technical Parameters
1. Test bench:a horizontal metal platform; a holder for fastening the leather to the platform, leaving approximately 80mm exposed; a device with which the leather may be extended 10% to 20% linearly in the direction of rubbing (sample size 120mm × 20mm).
2. Test column:weight (500 ± 25) g. It can be moved, but also firmly fixed. including:
A) Test head area: 15mm × 15mm;
B) Device for adjusting the test head to bring the felt pad into horizontal contact with the test platform;
C) Load bearing blocks: (500 ± 10) g. After loading, the total mass of the test column is 1000g;
D) Adjustment device: adjust the test column up and down so that the test head makes horizontal contact with sample.
3.Device that drives test bench for reciprocating motion:test head makes forward-backward motion with a stroke of 35mm ~ 40mm at a frequency of (40 ± 2) cycles / min.
4.Counter:LCD digital display, round-trip as one time, the number of cycles can be set to 5 to 500 times.
5.Device that can adjust the test column in the horizontal direction (optional):the test head can be rubbed against the leather samples at 2 to 3 different angles.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automobile Headrest Strength Tester | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static streng... |
 |
Moisture friction and wear testing machine | Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ... |
 |
2800 bar Pump Units | For concrete removal, heat exchanger cleaning, road marking removal,aireport runway marking removal,pipleline repair, high pressure cutting and pre... |
 |
Automotive wire cyclic bending testing machine-QINSUN | Standard This testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles &ndas... |
 |
Fabric Down-Proof Impact Tester (Impact Method) | Introduction The first sample is made of bags which built a certain quality of the down. The sample bag is placed on the slope, and the impact nee... |
Похожие товары
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Продавец: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Продавец: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Продавец: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Продавец: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Продавец: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
