Leather Rubbing Colorfastness Tester
Standards
ISO 11640Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing.
SATRA PM 173Reference standard of footwear testing content and methods.
QB/T 2537-2001Leather -- Tests for colour fastness --Colour fastness to reciprocating rubbing.
DIN 4843Safety Footwear; Safety Requirements, Testing
QB/T 2226Shoelace wear test method, light industry standards.
GB/T 20991-7.3Personal protective footwear test method.
Consumables
Friction material:
White wool felt, size 15mm × 15mm. The punched pure wool felt piece should meet the following requirements: pH of water extract between 5.5 ~ 7.0; mass per unit area (1750 ± 100) g / m2, thickness (5.5 ± 0.5) mm.
Technical Parameters
1. Test bench:a horizontal metal platform; a holder for fastening the leather to the platform, leaving approximately 80mm exposed; a device with which the leather may be extended 10% to 20% linearly in the direction of rubbing (sample size 120mm × 20mm).
2. Test column:weight (500 ± 25) g. It can be moved, but also firmly fixed. including:
A) Test head area: 15mm × 15mm;
B) Device for adjusting the test head to bring the felt pad into horizontal contact with the test platform;
C) Load bearing blocks: (500 ± 10) g. After loading, the total mass of the test column is 1000g;
D) Adjustment device: adjust the test column up and down so that the test head makes horizontal contact with sample.
3.Device that drives test bench for reciprocating motion:test head makes forward-backward motion with a stroke of 35mm ~ 40mm at a frequency of (40 ± 2) cycles / min.
4.Counter:LCD digital display, round-trip as one time, the number of cycles can be set to 5 to 500 times.
5.Device that can adjust the test column in the horizontal direction (optional):the test head can be rubbed against the leather samples at 2 to 3 different angles.
Other supplier products
|
|
Car seat component clearance test bench |
Applicable standards:
Car seat component clearance test benches usually follow the following domestic and international standards:
QC/T 805-200... |
|
|
Zipper torsion tester |
Product Introduction:
The zipper torsion tester is used to test the binding strength of the zipper pull head and whether it can withstand the spec... |
|
|
Electronic Rubbing Colour Fastness Tester-QINSUN |
Brief Introduction:Electronic rubbing colour fastness testeris designed with a base, rubbing rotation mechanism and a counter. Fix the specimen and... |
|
|
Fabric sensory quality evaluation tester |
Product innovation:
It is a fabric sensory quality assessment system developed by Nu Cybertek in California, USA, and has become a fabric hand ass... |
|
|
Box Compression Tester |
Standard operating mode:
1.Carton strength test: can measure the maximum pressure resistance and displacement of the box;
2. Carton setting tes... |
供应产品
Same products
