Gloves Cut Resistance Testing Machine

• 

Safety Glove Cutting Resistance Test Machine and testerfor testing the upper, protective gloves, leather and other materials, cutting strength, suitable for safety gloves protection area knife-resistant test, but not for those very hard material gloves.

Test Criteria:

EN ISO 20344. GB / T 20991. EN 388. EN 340

Detection Principle:

A rotating circular blade is cut and placed on a dedicated sample device. The blade is reciprocated under a specified load, automatically counted, the test is automatically stopped, and the difference between the test before and after the test is made. Test Results.

Technical Parameters:

1. Number of test samples: 1 group;

2. Horizontal movement displacement: 50mm;

3. Blade rotation direction: the opposite direction of motion;

4. Blade cutting speed: maximum 10cm / s;

5. Load on blade: 5 ± 0.05 N;

6. Round blade size: diameter 45 ± 0.5mm, thickness 3 ± 0.3mm;

7. Total cutting angle: 30 ° -35 °;

8. Blade material: hard tungsten steel, hardness of 740-800HV;

9. Dimension: 550 × 400 × 250mm (L × W × H);

10. Counter: LCD liquid crystal display, 0 ~ 99.999.999;

11. Weight: 57.5kg;

12. Power: 220V 50Hz;

Другие товары поставщика

	Carpet tuft length measuring instrument	Standard BS 4223:1989 (British Standard): Specifies methods for determining the pile length of cut-pile carpets, ensuring consistency in quality...
	Bubble Leak meter	Main Uses Medical Device Packaging Inspection:The Gross Leak Tester can be used for the sealing performance testing of various medical device pack...
	Circular Locus Pilling Tester	Standard GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory methodJIGBell-type gas flow standard device ve...
	Drying Rate Tester	The drying rate tester is a professional device used to measure the drying rate of a substance. Application fields Textile industry: used to eva...
	Hard Casing Retardant Performance Test Machine	Introduction Thismachuineis according to the provisions of paragraph 6.10 JG3050-1998 in combustion testing requirements to develop and produce. Th...

Похожие товары

	Steaming Cylinder	Продавец: Standard International Group (HK) Limited	Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin...
	Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine	Продавец: Standard International Group (HK) Limited	Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati...
	Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine	Продавец: Standard International Group (HK) Limited	Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to...
	Button Impact Tester丨Button Impact Test mechine	Продавец: Standard International Group (HK) Limited	Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista...
	AATCC Viewing Board丨AATCC Viewing Board tester	Продавец: Standard International Group (HK) Limited	Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m...