Gloves Cut Resistance Testing Machine
Safety Glove Cutting Resistance Test Machine and testerfor testing the upper, protective gloves, leather and other materials, cutting strength, suitable for safety gloves protection area knife-resistant test, but not for those very hard material gloves.
Test Criteria:
EN ISO 20344. GB / T 20991. EN 388. EN 340
Detection Principle:
A rotating circular blade is cut and placed on a dedicated sample device. The blade is reciprocated under a specified load, automatically counted, the test is automatically stopped, and the difference between the test before and after the test is made. Test Results.
Technical Parameters:
1. Number of test samples: 1 group;
2. Horizontal movement displacement: 50mm;
3. Blade rotation direction: the opposite direction of motion;
4. Blade cutting speed: maximum 10cm / s;
5. Load on blade: 5 ± 0.05 N;
6. Round blade size: diameter 45 ± 0.5mm, thickness 3 ± 0.3mm;
7. Total cutting angle: 30 ° -35 °;
8. Blade material: hard tungsten steel, hardness of 740-800HV;
9. Dimension: 550 × 400 × 250mm (L × W × H);
10. Counter: LCD liquid crystal display, 0 ~ 99.999.999;
11. Weight: 57.5kg;
12. Power: 220V 50Hz;
在线联系供应商
Other supplier products
 |
Fatigue Endurance Tester for Dental Implants | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure... |
 |
Appliance Stability Tester | Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1 and other standards. The device is composed of a workbe... |
 |
Spring torsion tester | Product Advantages: Accurate Measurement: Provides precise measurement of torque and angle. Determines Torsional Properties: Essential for quanti... |
 |
Total Knee Joint Prostheses Wear Test machine | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and... |
 |
Electrolyte wettability test device | Standard ASTM D724-98: Standard Test Method for Surface Wettability of Paper (Angle-of-Repose Method Adapted) ISO 8296: Plastics – Determ... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15.... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ... |
