Gloves Cut Resistance Testing Machine
Safety Glove Cutting Resistance Test Machine and testerfor testing the upper, protective gloves, leather and other materials, cutting strength, suitable for safety gloves protection area knife-resistant test, but not for those very hard material gloves.
Test Criteria:
EN ISO 20344. GB / T 20991. EN 388. EN 340
Detection Principle:
A rotating circular blade is cut and placed on a dedicated sample device. The blade is reciprocated under a specified load, automatically counted, the test is automatically stopped, and the difference between the test before and after the test is made. Test Results.
Technical Parameters:
1. Number of test samples: 1 group;
2. Horizontal movement displacement: 50mm;
3. Blade rotation direction: the opposite direction of motion;
4. Blade cutting speed: maximum 10cm / s;
5. Load on blade: 5 ± 0.05 N;
6. Round blade size: diameter 45 ± 0.5mm, thickness 3 ± 0.3mm;
7. Total cutting angle: 30 ° -35 °;
8. Blade material: hard tungsten steel, hardness of 740-800HV;
9. Dimension: 550 × 400 × 250mm (L × W × H);
10. Counter: LCD liquid crystal display, 0 ~ 99.999.999;
11. Weight: 57.5kg;
12. Power: 220V 50Hz;
Send product request
Other supplier products
 |
Shoelace anti-siphon tester | Product Introduction: Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon wate... |
 |
Large Flame Flammability Tester | IntroductionThe Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It&rsq... |
 |
Diaper impurity detector | Product Introduction: The diaper impurity detector is used to detect the impurities remaining inside the diaper under a certain strong light irrad... |
 |
Face Mask Tensile Tester丨Face Mask Tensile Test machine | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
Wire Cut - through Tester for Ford Automotive Wires | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
Same products
 |
Steaming Cylinder | Seller: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Seller: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Seller: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | Seller: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Seller: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
