.

Car seat simulates Ingress/Egress tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

SAE J826-2002 – Anthropomorphic Test Devices for Vehicle Seating Systems

QC/T 740-2017 – Automotive Seat Fatigue Test Standard

Industry standards for automotive seat ingress and egress durability

Features

Four servo-electric motor-driven axes and three pneumatic functions for realistic movement.

Simulates in & out, right & left, up & down, rotation, free weight drop & recapture, and independent leg motion.

True body weight simulation (35–100kg) for realistic dynamic loading, including inertia effects.

Concurrent and programmable motion sequences for highly life-like testing.

Evaluates seat cushion, backrest, frame, foam, and fabric durability under repeated entry and exit cycles.

Adjustable test frequency, amplitude, and cycle count with automatic stop at the end of the test.

Parameters

ParameterSpecificationNotes
Dummy Model 3D indenter, 50% SAE J826-2002 Wrapped with 12mm foam and denim
Pressure Head Weight 44.5 kg Adjustable for different test scenarios
Horizontal Slide ~25 mm into cushion Inner rear first with 30° rotation
Load on Pressure Head 445 N Maintained during creep and exit cycles
Rotation Angle 30° Simulates realistic entry angle
Experimental Frequency 4.5 cycles/min Adjustable
Number of Experiments 15.000 simulated ingress/egress cycles

Accessoriess

Pointer glass cover: Typically made of thickened tempered glass or acrylic, providing explosion-proof, scratch-resistant, and impact-resistant properties.

Washer: Located between the bottom of the scale and the platform, serving to absorb shock and stabilize the scale.

Zero-adjustment screw: Allows the pointer to accurately return to zero when unloaded by fine-tuning the balance system.

Weight weight: Used to measure weight.

Hook: Used to secure the weight.

Height ruler: Used to measure height.

Electronic height meter: Used to measure both height and weight.

Test Procedures

Prepare the 3D dummy indenter according to SAE J826-2002 standards. Wrap with foam and denim, and add weight to simulate realistic human mass.

Secure the seat assembly on the test bench and adjust to design position.

Program the robot motion for simulated human entry/exit:

Horizontal slide of pressure head into seat, rotating 30°

Align center line of pressure head with seat center

Creep and stabilize pressure head within the seat

Maintain 445 N load while sinking into seat

Continue creep against backrest at 30°

Maintain 445 N load as pressure head is halfway out

Slide along seat cushion edges during exit, simulating edge indentation

Start the test cycle; machine automatically repeats motions at set frequency.

Stop automatically after 15.000 simulated cycles and inspect seat for damage.

Safety and Maintenance

Ensure proper calibration of servo-electric axes and pneumatic actuators.

Check dummy and pressure head integrity before testing.

Maintain and inspect all mechanical and pneumatic components regularly.

Emergency stop and overload protection are built-in for operator safety.

Clean and lubricate moving parts as per manufacturer instructions.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Rubber Hose Dynamic Wear Testing Equipment ASTM International
Rubber Hose Dynamic Wear Testing Equipment ASTM International Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 12721-2007 — Determination of abrasion resistance o...
Falling Sand Abrasion Tester
Falling Sand Abrasion Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ...
ISO 15105 gas permeability tester for plastic film and packaging materials
ISO 15105 gas permeability tester for plastic film and packaging materials Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YBB 00082003 Determination of Gas Permeability of Pharmaceutical P...
Automatic Floor Caster Wear Testing Machine ASTM D2047
Automatic Floor Caster Wear Testing Machine ASTM D2047 Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 11982.2 – Floor covering castor wear test method. ...
Automotive Wires Low - temperature Impact Tester with ISO certification
Automotive Wires Low - temperature Impact Tester with ISO certification Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wires Low-Temperature Impact Tester is designed to evaluate th...
Все товары поставщика

Похожие товары

Industrial automotive sunshade end cap assembly line supplier
Industrial automotive sunshade end cap assembly line supplier Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ...
High precision vehicle sunshade assembly machine
High precision vehicle sunshade assembly machine Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man...
High precision control cable performance testing machine
High precision control cable performance testing machine Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto...
Industrial automotive & motorcycle cable fatigue tester supplier
Industrial automotive & motorcycle cable fatigue tester supplier Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto...
Vehicle shock absorber jounce testing machine
Vehicle shock absorber jounce testing machine Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti...