Car seat simulates Ingress/Egress tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
SAE J826-2002 – Anthropomorphic Test Devices for Vehicle Seating Systems
QC/T 740-2017 – Automotive Seat Fatigue Test Standard
Industry standards for automotive seat ingress and egress durability
Features
Four servo-electric motor-driven axes and three pneumatic functions for realistic movement.
Simulates in & out, right & left, up & down, rotation, free weight drop & recapture, and independent leg motion.
True body weight simulation (35–100kg) for realistic dynamic loading, including inertia effects.
Concurrent and programmable motion sequences for highly life-like testing.
Evaluates seat cushion, backrest, frame, foam, and fabric durability under repeated entry and exit cycles.
Adjustable test frequency, amplitude, and cycle count with automatic stop at the end of the test.
Parameters
| Parameter | Specification | Notes |
|---|---|---|
| Dummy Model | 3D indenter, 50% SAE J826-2002 | Wrapped with 12mm foam and denim |
| Pressure Head Weight | 44.5 kg | Adjustable for different test scenarios |
| Horizontal Slide | ~25 mm into cushion | Inner rear first with 30° rotation |
| Load on Pressure Head | 445 N | Maintained during creep and exit cycles |
| Rotation Angle | 30° | Simulates realistic entry angle |
| Experimental Frequency | 4.5 cycles/min | Adjustable |
| Number of Experiments | 15.000 simulated ingress/egress cycles | — |
Accessoriess
Pointer glass cover: Typically made of thickened tempered glass or acrylic, providing explosion-proof, scratch-resistant, and impact-resistant properties.
Washer: Located between the bottom of the scale and the platform, serving to absorb shock and stabilize the scale.
Zero-adjustment screw: Allows the pointer to accurately return to zero when unloaded by fine-tuning the balance system.
Weight weight: Used to measure weight.
Hook: Used to secure the weight.
Height ruler: Used to measure height.
Electronic height meter: Used to measure both height and weight.
Test Procedures
Prepare the 3D dummy indenter according to SAE J826-2002 standards. Wrap with foam and denim, and add weight to simulate realistic human mass.
Secure the seat assembly on the test bench and adjust to design position.
Program the robot motion for simulated human entry/exit:
Horizontal slide of pressure head into seat, rotating 30°
Align center line of pressure head with seat center
Creep and stabilize pressure head within the seat
Maintain 445 N load while sinking into seat
Continue creep against backrest at 30°
Maintain 445 N load as pressure head is halfway out
Slide along seat cushion edges during exit, simulating edge indentation
Start the test cycle; machine automatically repeats motions at set frequency.
Stop automatically after 15.000 simulated cycles and inspect seat for damage.
Safety and Maintenance
Ensure proper calibration of servo-electric axes and pneumatic actuators.
Check dummy and pressure head integrity before testing.
Maintain and inspect all mechanical and pneumatic components regularly.
Emergency stop and overload protection are built-in for operator safety.
Clean and lubricate moving parts as per manufacturer instructions.
在线联系供应商
Other supplier products
 |
Automotive Expansion Tank Leak & Pressure Tester | OEM Supplier for Thermal Management Systems | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Designed specifically for static pressure testing of expansion tank... |
 |
Portable Retroreflectometer for Wet and Dry Conditions ASTM E2177 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The machine complies with multiple international and national stan... |
 |
ISO 22612 microbial barrier tester for protective clothing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental... |
 |
Cut Susceptibility Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements f... |
 |
Floor Caster Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Floor Caster Wear Tester is designed to evaluate the wear resistance of chair casters o... |
Same products
 |
Industrial automotive sunshade end cap assembly line supplier | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ... |
 |
High precision vehicle sunshade assembly machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man... |
 |
High precision control cable performance testing machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto... |
 |
Industrial automotive & motorcycle cable fatigue tester supplier | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto... |
 |
Vehicle shock absorber jounce testing machine | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti... |
