PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA66 GF15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.
PA66 GF15 Storage and Handling
PRE-PROCESSING：
Pre-drying: 4-6h / 130°C
Processing:
Melting temperature 280 - 300 °C
Mold temperature 60 - 100 °C
Product storage and handling:
PA is a highly hygroscopic material. When the dryPA materialis exposed to the atmosphere, it will absorb moisture quickly, so it is recommended to keep it sealed. In order to ensure the best performance index after extrusion, the material must be dried before processing, and the moisture content of the particles should not exceed 0.02%. It is recommended that the material be dried at 110-130°C for 4~6h.
PAGF15Heat Stabilized (A2006C) Typical Application
PA66 15% glass fiber and heat stabilized modified grades are applied to the sectors of circuit breaker, electrical box shell, water pump housing and cover, offering high rigidity and resistance to thermal deformation.
Suzhou ANMEIMaterial Technology Co., Ltd. – the professional supplier of engineering plastic and the color masterbatchwas founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.
Send product request
Other supplier products
 |
PA66 GF35 (A2000G, A2011G, A2111G) for Engineering Plastics | PA66 is nylon 66, namely pa66_gf35is glass fiber. Generally expressed as PA66 GF35, that is, 35% glass fiber is added to nylon 66. Typical Appli... |
 |
Anmei-ABS Engineering Plastic | ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyac... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending and modifying with the addition of a toughening age... |
 |
Anmei-PA66 GF for Engineering Plastics | Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with propertiesof heat-resistant, reinf... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 15 GFStorage and Handling PRE-PROCE... |
