Single Gap Joints

• 
• 
• 
• 
• 
• 
• 
• 
• 

Single gap joints for movements of up to 80 mm are expansion joints made of a single set of structural steel, rubber sealing strips and dowel rods. They have mainly 5 types, including GQF-C, GQF-F, GQF-E, GQF-Z and GQF-RG. Being fully anchored within the depth of the road surfacing, single gap joints can prevent roads from cracking caused by climatic change.

In order to meet the requirements of the bridge deformation, single gap joints are usually set at each end of the bridge, between ends of the beam and abutment or on the hinge joints of the bridge. They are applied with rubber noise weaken board which can help to increase movement and reduce noise from over-passing traffic by up to 80%.

Features
Single gap joints are retractable and solid on both directions parallel and perpendicular to the bridge axis to ensure vehicles runs smoothly and no noise.
Single gap joints can prevent rainwater permeation and dirt clogging.
Single gap joints are simple and easy to install, check, maintain and clean.

Application
Single gap joints are suitable for kinds of bridges which are curved, slope, skew and wide. They can also perform well on both new-built bridges and bridges have been built, both asphalt and concrete bridge surface.

Having a limited depth of the structure and being able to be installed quickly, single gap joints are extremely well-positioned to replace the damaged one in a restoration project.

Other supplier products

	Finger Joints	Finger joints are designed to handle movements of 80 mm to 1,200 mm are composed by steel finger plates, CR sheet, anchor bolts and other component...
	Multiple-gap Expansion Joints	Multiple-gap expansion joints, also called GQF-MZL modular bridge joints, are composed by boundary beams, middle beams, cross girders, displacement...
	Single Gap Joints	Single gap joints for movements of up to 80 mm are expansion joints made of a single set of structural steel, rubber sealing strips and dowel rods....
	TST Expansion Joint	TST expansion joint (also referred to as TST bridge joint) for movements up to 40 mm is a simple bridge expansion joint filled with asphalt. TST (c...
	Rubber Bridge Expansion Joints	Rubber bridge expansion joints are mainly made of rubber, steel and angle steel. The steel plates are extended at the rubber bridges to provide inc...

Same products

	LCCP Chlorinated paraffin- 45	Seller: Xipeng Technology(Luoyang) Co.,LTD.	Chlorinated paraffin- 45 Cas No. 63449-39-8 Product features: Yellow or light yellow viscous and ...
	RUBBER ACCELERATOR ETU	Seller: HENAN JUJIN IMPORT AND EXPORT CO.,LTD.	RUBBER ACCELERATOR ETU(NA-22) Chemical Name:Ethylene thiourea(NA-22) Molecular Formula:C3H6N2S Mo...
	RUBBER ANTIOXIDANT PBN	Seller: HENAN JUJIN IMPORT AND EXPORT CO.,LTD.	RUBBER ANTIOXIDANT PBN(D) Chemical name:N-phenyl-2-naphthylamine Molecular Form...
	RUBBER ANTIOXIDANT 6PPD	Seller: HENAN JUJIN IMPORT AND EXPORT CO.,LTD.	RUBBER ANTIOXIDANT 6PPD(4020) Chemical Name :N - ( 1 ,3 - dimethylbutyl ) - N' - phenyl - p - ph...
	RUBBER ANTIOXIDANT IPPD	Seller: HENAN JUJIN IMPORT AND EXPORT CO.,LTD.	RUBBER ANTIOXIDANT IPPD(4010NA) Chemical Name:N-isopropyl-N'-phenyl-p-phenylene diamine Molecul...