Multiple-gap Expansion Joints

• 
• 
• 
• 
• 
• 

Multiple-gap expansion joints, also called GQF-MZL modular bridge joints, are composed by boundary beams, middle beams, cross girders, displacement control systems, bridge bearings, anchoring components and rubber sealing belts. Multiple-gap expansion joints are suitable for longitudinal movements of 80 mm to 1,200 mm.

Having good bearing capacity and stability, multiple-gap expansion joints can accommodate movements in every direction and rotations about every axis. Their individual displacement control and load transfer systems enable bridges to adapt the movement of the beam caused by temperature and ensure the traffic safety.
Feature
Safe & reliable: The load-bearing structure and displacement control system of multiple-gap expansion joints are separate parts. When under stress, these two parts will not interfere with each other and have a clear division of labor to provide security assurance.
Uniform displacement: Multiple-gap expansion joints meet the requirements of high processing and assembling precision to make sure that they can be flexible and proceed uniform displacement.
Strong adaptability: Each junction adopts the structure which can both slide and be rotatably to content the demand of various kinds of bridges.
Save steel: In every displacement control cabinet, all the middle beams are supporting one cross beam which is benefit to large-displacement bridges. This structure can reduces the quantity of beams, the volume of control cabinet and saves steel.
Application
Multiple-gap expansion joints for longitudinal movements of 80 mm to 1,200 mm can be widely applied on the bridges which are slope, wide, curved and skew. They are used in highway bridge decks, bridgehead and other places to prevent bridges from appearing cracks cause by climate change.

Other supplier products

	TST Expansion Joint	TST expansion joint (also referred to as TST bridge joint) for movements up to 40 mm is a simple bridge expansion joint filled with asphalt. TST (c...
	Multiple-gap Expansion Joints	Multiple-gap expansion joints, also called GQF-MZL modular bridge joints, are composed by boundary beams, middle beams, cross girders, displacement...
	Single Gap Joints	Single gap joints for movements of up to 80 mm are expansion joints made of a single set of structural steel, rubber sealing strips and dowel rods....
	Rubber Bridge Expansion Joints	Rubber bridge expansion joints are mainly made of rubber, steel and angle steel. The steel plates are extended at the rubber bridges to provide inc...
	Finger Joints	Finger joints are designed to handle movements of 80 mm to 1,200 mm are composed by steel finger plates, CR sheet, anchor bolts and other component...

Same products

	Knitted fabric	Seller: Suzhou Junhui Textile Co., Ltd.	SUZHOU JUNHUI TEXTILE CO.,LTD SUZHOU XIAORAN NEW MATERIAL CO.,LTD PRODUCT LIST Recycle Serie...
	Efficient formaldehyde removal Visible light absorbing photocatalyst 5nm nano titanium dioxide powder CY05	Seller: Hangzhou Jiupeng New Material Co., Ltd	Instructions: The CY05 powder is made into an aqueous solution with a solid content of 1-2% wit...
	Plastic Window Screening	Seller: HEBEI ANPING WIRE MESH CO.,LTD	Shenhua HDPE, Yanshan HDPE, recycled plastic, recycled and pure mixture (1) plain woven plastic w...
	Multiple-gap Expansion Joints	Seller: Hengshui JingTong Rubber Co., Ltd.	Multiple-gap expansion joints, also called GQF-MZL modular bridge joints, are composed by boundar...
	Finger Joints	Seller: Hengshui JingTong Rubber Co., Ltd.	Finger joints are designed to handle movements of 80 mm to 1,200 mm are composed by steel finger ...