RTV-2 Silicone Rubber for Mold Making
Introduction
RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-2 are available: "condensation" cure type and "addition" cure type. Generally, RTV-2 Silicone Rubber is a kind of two-component material. The RTV-2 silicone rubber is made up of Part A base silicone and Part B curing agent. The Part A base silicone and Part B CA curing agent can cure at room temperature by a condensation reaction, after full cure, it become a cured silicone mold. The silicone mold can be cast the following materials for reproduction: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc...
Applications
RTV-2 silicone rubber for mold making can be used in the filed of reproducing cement molds, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.
Instruction for making RTV-2 silicone rubber mold
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.
- Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100:2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35℃ (95℉).it’s suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.
Storage of RTV-2 Silicone Rubber
When the silicone rubber is stored at or below 30 ℃ (85 ℉) in the original unopened containers, RTV2 Silicone Base and CA30 Curing agent have a usable life of 12 months from the date of production. After 12 months, please use a stirring mill to stir the Part A silicone for some minutes, then the silicone can be use again, without any influence to the characteristics.
Packing of RTV-2 Silicone Rubber
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle,1kg/bottle and 10kg/bottle
Send product request
Other supplier products
RTV-2 Silicone Rubber for Candle Mold Making | Description of RTV-2 Silicone Rubber for Candle Mold Making RTV-2 silicone rubber is a two-component material, which consists of Part A base silic... | |
LSR Liquid Silicone Rubber | Description of LSR Liquid Silicone Rubber MC RTV1040 silicone rubber is a two component elastomeric cross-linking at room temperature. The polym... | |
RTV-2 Silicone Rubber for Soap Mold Making | Description of RTV-2 Silicone Rubber for Soap Mold Making RTV-2 silicone rubber is a two-component material, which consists of Part A base silic... | |
Liquid Silicone Rubber for Molding | Description RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-2... | |
RTV-2 Silicone Rubber for Shoe Mold Making | Description of RTV-2 Silicone Rubber for Shoe Mold Making RTV-2 silicone rubber is a two-component material, the silicone consists of Part A silic... |
Same products
Embossed Silicone Rubber Wristbands/Bracelets Bulk | Seller: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... | |
SILICONE BRACELET | Seller: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... | |
Silicone Square ICE Cube Tray | Seller: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... | |
Silicone Sports Bottle | Seller: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... | |
Silicone Sphere Tray | Seller: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |