LSR Liquid Silicone Rubber
Description of LSR Liquid Silicone Rubber
MC RTV1040 silicone rubber is a two component elastomeric cross-linking at room temperature. The polymerization can be accelerated by heat (max.1500 C). The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.
Advantages of LSR Liquid Silicone Rubber
- C).The curing characteristics is independent of part thickness.
Applications of LSR Liquid Silicone Rubber
Label manufacturing, Molding applications requiring low shrinkage, such as toys, jewelers, automotive, rapid prototyping etc.
Technical datasheet of LSR Liquid Silicone Rubber
Base and Curing Agent Mixture (100:10 by weight) in 23 C (73F) testing
|
Item |
RTV 1040 |
|
Color |
clear |
|
Curing agent |
CA30 |
|
Mixing ratio |
100:10 |
|
Mixed viscosity |
cps |
|
Working time |
60 mins |
|
Curing time |
12 Hours |
|
Hardness |
40 Shore A |
|
Tear Strength |
27 N/mm |
|
Tensile Strength |
6 Mpa |
|
Shrinkage |
≤0.1% |
|
Elongation at break |
360% |
|
Relative density |
Instructions for making silicone molds
According the mixing ratio 10:1 weighting part A and B, the two components may be thoroughly mixed either by hand or using a low –speed electric to minimize the entrance of air and to avoid any temperature increase.
Note: It is also possible to use a special mixing and dispensing machine for the two silicone components, further information is available upon request.
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3 to 4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio(3 to 4 times of the initial volume)
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note: in general contact with certain materials can inhibit the cross linking of RTV.
Natural rubbers vulcanized with sulfur
RTV elastomeric is catalyzed with metal salts, e.g. Tin compounds
PVC stabilized with tin salts and additives
Epoxy catalyzed with amines
Certain organic solvents, such as Ketones, alcohols, ether etc.
In case of doubt, it is recommended to test the substrate by applying a small quantity of the mixed silicone on a restricted area.
Storage and shelf life of LSR Liquid Silicone Rubber
MC silicone RTV1040 A and B must be used within 6 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales specification. In order to preserve best properties it is recommended to follow strictly the following guidelines:
Store the original packing tightly sealed and at a temperature below 30 C
Use the product as soon as the packaging has been opened.
Packaging of LSR Liquid Silicone Rubber
Part A: 20kg/drum； Part B: 2 kg /drum
Special containers are available are on request.
Send product request
Other supplier products
 |
RTV-2 Silicone Rubber for Candle Mold Making | Description of RTV-2 Silicone Rubber for Candle Mold Making RTV-2 silicone rubber is a two-component material, which consists of Part A base silic... |
 |
RTV-2 Silicone Rubber for Stone Mold Making | Description of RTV-2 Silicone Rubber for Stone Mold Making RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consist... |
 |
RTV-2 Silicone Rubber for Mold Making | Introduction RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-... |
 |
Liquid Silicone Rubber for Molding | Description RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-2... |
 |
RTV-2 Silicone Rubber for Shoe Mold Making | Description of RTV-2 Silicone Rubber for Shoe Mold Making RTV-2 silicone rubber is a two-component material, the silicone consists of Part A silic... |
Same products
 |
Embossed Silicone Rubber Wristbands/Bracelets Bulk | Seller: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... |
 |
SILICONE BRACELET | Seller: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... |
 |
Silicone Square ICE Cube Tray | Seller: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... |
 |
Silicone Sports Bottle | Seller: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... |
 |
Silicone Sphere Tray | Seller: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |
