Silicone rubber material for baby nipples,Softy & Transparent Silicone Rubber
PRODUCT DESCRIPTION:
The series is high transparence and tear strength, 2-part liquid silicone rubber suitable for injection molding processes.
KEY FEATURES:
1. High transparence
2. High tensile strength
3. Good rebound property
4. Outstanding resistance to ageing
5. Low shrinkage
6. Non-discoloring
7. Excellent thermal and cold stability
APPLICATIONS:
The series are suitable for making baby nipples.
PACKAGING:
It is available in 20kg pails of 200kg drums
TYPICAL PROPERTY:
Appearance: Transparent;
Viscosity (mpas): 650,000~950,000;
Hardness: 20~70 Shore A;
Tensile Strength: 6.5~8.5 MPa;
Tear Strength: 20~35 KN/m;
Elongation at break: 330%~800%;
Linear shrinkage: 0.1%
REMARKS:
The product should be closed tightly, protected from light and moisture, the shelf life is 12 months
These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Other supplier products
|
Silicone rubber for cell phone keypad,Softy Silicone Rubber,Transparent Silicone Rubber |
PRODUCTION DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding... |
|
Silicone Rubber for Cement Casting,Silicone Rubber For Statues Molds,High Tear Strength Silicone Rubber |
DESCRIPTION OF SILICONE RUBBER FOR CEMENT CASTING:It is a kinds of Two-parts silicone, part A is flowable liquid silicon, part B is curing a... |
|
Candles Mold making Silicone Rubber,Low Shrinkage Silicone Rubber,Crafts Mold Making Silicone Rubber |
FEATURES OF CANDLES MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resista... |
|
Silicone rubber material for baby nipples,Softy & Transparent Silicone Rubber |
PRODUCT DESCRIPTION:The series is high transparence and tear strength, 2-part liquid silicone rubber suitable for injection molding processes... |
|
Silicone encapsulant for LEDs,Silicone Rubber for Electronic Products,Liquid Silicone Rubber |
DESCRIPTION:Silicone encapsulant for leds is a type of two-component encapsulation silicone cured at room temperature.This silicone works o... |
All supplier products
Same products