Leakage negative pressure tester for infusion device
Leakage negative pressure tester for infusion device - Other test instrument - standard
Product Information:
The leakage negative pressure tester is a special equipment designed according to the relevant provisions of the national standard(gb838-2005) designed to detect the sealing performance of the infusion device.
Technical Parameters:
1、environment：
operating temperature：5～40℃
relative humidity：（45～80）％
Power voltage：220V±22V
Grid frequency：50HZ±1HZ
2、Specification：
Negative pressure test: -10 ~ -30kpa error is not greater than + 0.5KPa, LED digital display negative pressure.
Negative pressure output -10 ~ -30kpa + 0.5kpa, LED digital display negative pressure.
The negative pressure of the measuring system is maintained: within 1 minute, it shall not drift + 0.5kpa.
Duration of test: 60S, no more than 0.5KPa.
Send product request
Other supplier products
 |
Steel wheel wear testing machine | Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes... |
 |
Hot Pressing Sublimation Colorfastness Tester | Standards: GB/T 5718 Textiles color fastness test. P01: Colour fastness to dry heat (excluding heat pressing) GB/T 6152 Textiles; tests for colo... |
 |
KES - FB2 - S Bending Tester | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flex... |
 |
Solid Auto - ignition Point Tester/ Solid Material Autoignition Tester/ Self-Ignition Point Tester | Product Introduction This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - s... |
 |
Micro Controll Constant-Speed Friction Plate Tester | Main uses 1. microcomputer control fixed-speed friction tester is mainly used to measure the friction coefficient and wear rate of automobile brak... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Seller: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Seller: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Seller: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Seller: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Seller: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
