Rubber non-rotor vulcanization Tester丨 Rubber Testing Instruments
Product Introduction:
Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic research and application instrument, for rubber optimization formula combination provides accurate data, can accurately measure the coke time, positive vulcanization time, vulcanization index and large, small torque and other parameters.
Reference standard:
ASTM D5289-95. ISO 6502-1999(E)， GB/T 16584-1996
Technical parameters:
Temperature measurement range: 0--200℃
Setting range: 0--200℃
Temperature display range: 0--200℃
Set time range: 0-200 minutes
Torque measuring range: 0-5N.m, 0-10N.m, 0-20N.m
Power supply: AC 220V±10%, 50±1Hz, must be well grounded
Compressed air: 0.32Mpa, controlled by pneumatic control valve
Swing frequency: 100 times/min (about 1.7HZ)
Ambient temperature: 0-40 ℃， relative humidity is less than 80%, the air does not contain corrosive gases
Send product request
Other supplier products
 |
Spectrophotometer ISO 7724 | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
 |
Heel Fatigue Tester ISO 19956 | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel ti... |
 |
Large diameter blasting test machine ISO 1167 | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable... |
 |
Medical glove water-impermeability tester | The Impermeability Tester for Medical Gloves plays a crucial role in the medical field. The following is a detailed introduction to its main uses, ... |
 |
Leather Low Temperature Bending Strength Tester G6078-B | Product Introduction This instrument is primarily used to test the cold and folding resistance of shoes and shoe materials to determine how well t... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Seller: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Seller: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Seller: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Seller: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Seller: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
