UV Lamp Aging Test Tester
This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, strength and cracking, spalling, powder, oxidation damage via the high temperature sun light (UV), high humidity, condensation, dark cycle etc. At the same time, through the synergy between UV and moisture resistance ability of single or single material makes wet ability weakening or failure, which is widely used to evaluate the performance of weather resistant materials, equipment is to provide the best sunshine UV simulation.
Usage and maintenance are of low cost, easy to use. Equipment uses program controller can automatic control the test cycle, with high automatic high degree. In addition, it has stable light performance and high rate of repetition test results.
TheUV aging test chamberis suitable for all kinds of geo-synthetics, such as light resistance, weather resistance and light ageing
The exposure test of the sample was carried out in a fluorescent UV lamp vessel in a controlled environment. It can simulate and strengthen the environmental factors in the natural climate that are affected by light, heat, humidity, and rainfall as the main aging. It can simulate the accelerated test under long term exposure to obtain the results of the weather resistance of the material.
Ultraviolet tester Standard
▶JTG E50 T1164The methods of geo-synthetics for highway engineering
▶GB/T 14522-93Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products.
▶GB-T16422.3-1997Plastics--Methods of exposure to laboratory light sources--Part 3: Fluorescent UV lamps
▶ISO4892-3:1994Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
Structures
▶Main features: light, condensation, automatic cycle control, real-time monitoring and display
▶Light temperature: RT + 10 ℃ ~ 70 ℃
▶Condensation temperature: 50 ℃
▶Condensation method: steam humidification condensation
▶Temperature uniformity: ± 3 ℃
▶Irradiation intensity: 0.55W / m2
▶Light / condensation cycle: 0 ~ 9999h,59min. It can be set (such as: 4H / 4H or 8H / 8H)
▶Lamp center distance: 70mm
▶Sample and lamp plane distance: 55mm
▶UV lamp: UV-A340 or UV-B313 (optional)
▶UV wavelength: (UVA) 315 ~ 400nm; (UVB) 280 ~ 315nm
Send product request
Other supplier products
 |
Konan Tester | Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.5.1 Test 1(b): Kernan... |
 |
Automatic Reaction Calorimeter | Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers three calorimetry methods: heat - flow, power - compensati... |
 |
Face Mask Tensile Strength Testing Machine (for Face Mask Tensile Tester) | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
G612 national standard shoe wear testing machine | Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
 |
Rubbing Abrasion Testing Machine | T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi... |
Same products
 |
Steaming Cylinder | Seller: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Seller: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Seller: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | Seller: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Seller: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
