SHOCK ABSORBER
SHOCK ABSORBER
Type SJ
Shock Absorber Type SJ should be connected with the drilling string close to the bit. It can reduce or absorb both longitudinal and circumferential vibration of the drilling string in drilling operations. It can achieve the optimum combination of drill pressure and drill speed, reduce the drilling cost and promote the drilling efficiency.
Hydraulic Shock Absorber Type YJ
Hydraulic Shock Absorber Type YJ should be connected with the drilling string close to the bit. It can absorb or reduce axial vibration and thrust load of the drilling string, and have a good result for prolonging the service life of the bit and protecting the drilling tools as well as surface equipment.
Mechanical-Hydraulic Shocker Absorber Type DHJ
Mechanical-Hydraulic Shocker Absorber Type DHJ is a new type double-acting shock absorber. It absorbs the pulsation and shock from drill tools by compressing spring and silicon oil to store the energy. This shock absorber has advantages of good maintainability, bearing high load and long service life.
Specifcation of Mechanical-Hydraulic Shocker Absorber Type DHJ
TYPE OD in(mm) ID in(mm) Tool Joint Connection
API Max. Tensile Load Lbf(N) Max. Drill Pressure Lbf(N) Max. WorkingTorque Lbf-ft(N•m) Max. Stroke in(mm) Ambient Temp.
℃ Overall Length “Extended” ft-in(mm)
DHJ121 4-3/4
(121) 1-1/2
(38) 3-1/2REG 220,320
(980,000) 89,920
(400,000) 7,370
(10,000) 4
(100) -40℃
~ +150℃ 11’ 2”
(3,400)
DHJ159 6-1/4
(159) 2
(51) NC46 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ178 7
(178) 2-1/4
(57.2) NC50 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ203 8
(203) 2-13/16
(71.4) 6-5/8REG 449,640
(2,000,000) 157,370
(700,000) 14,450
(19,600) 5-1/2
(140) 15’ 5”
(4,700)
Other supplier products
|
|
Heavy Weight Drill Pipe |
Heavy Weight Drill Pipe
Integral or Weld Heavy Weight Drill Pipe
Standard: API Spec 7
Specification: OD 3 1/2”, 4 1/2”, 5”, 5 1/2”
Material: AISI 4... |
|
|
Drill Collar Slips |
DCS Drill Collar Slips, there are three model: S, R and L, they can accommodate drill collar from 3”(76.2mm) to 14”(355.6mm)O.D.
Type WT Drill Col... |
|
|
Elevators |
Elevators
DDZ Elevators
Center Latch Elevators are suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. The elevators are ... |
|
|
Hole Opener |
The Fixed Diameter Hole Opener
It is made of tough heat treated alloy steel for maximum strength. Cutter arms, equipped with removable cutter, a... |
|
|
Drilling Jar |
Type JZ
This full mechanical drilling jar offers mechanical jarring in both directions. The load scope of the up jarring and the down jarring is s... |
All supplier products
Same products
