TCI Tricone Bit
Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone bit are crushed and eaten into the rock, and at the same time there is a corresponding sliding to shear the rock. When it rolls at the bottom of the well, the teeth on it will impact and press into the formation in sequence. This effect can crush a part of the rock at the bottom of the well, and at the same time rely on its sliding to weaken the shearing effect of the teeth. The remaining rocks in between break all the rocks at the bottom of the well and allow the wellbore to be extended.
Specifications Of TCITricone Drill Bits
|
Tricone Bits |
|||
|
Size |
IADC Code |
API Thread |
|
|
inch |
mm |
||
|
3 7/8'' |
126/216/637 |
2 3/8 |
|
|
4 7/8'' |
126/216/517/537/637 |
2 7/8 |
|
|
5 1/4'' |
126/216/517/537/637 |
3 1/2 |
|
|
5 5/8'' |
126/216/517/537/637 |
3 1/2 |
|
|
5 7/8'' |
126/216/517/537/637 |
3 1/2 |
|
|
6'' |
126/127/216/517/537/617/637 |
3 1/2 |
|
|
6 1/4'' |
126/127/216/517/537/617/637 |
3 1/2 |
|
|
6 1/2'' |
165 |
126/127/216/517/537/617/637 |
3 1/2 |
|
7 1/2'' |
190 |
126/216/517/537 |
4 1/2 |
|
7 5/8'' |
193 |
126/216/517/537 |
4 1/2 |
|
7 7/8'' |
200 |
126/216/517/537 |
4 1/2 |
|
8 1/2'' |
117/127/217/437/517/537/617/637 |
4 1/2 |
|
|
9 1/2'' |
117/127/217/437/517/537/617/637 |
6 5/8 |
|
|
9 7/8'' |
117/127/217/437/517/537/617/637 |
6 5/8 |
|
|
10 5/8'' |
117/127/217/437/517/537/617/637 |
6 5/8 |
|
|
11 5/8'' |
117/127/217/437/517/537/617/637 |
6 5/8 |
|
|
12 1/4'' |
117/127/217/437/517/537/617/637 |
6 5/8 |
|
|
13 5/8'' |
346 |
127/217/517/537/617/637 |
6 5/8 |
|
14 3/4'' |
127/217/517/537/617/637 |
7 5/8 |
|
|
17 1/2'' |
114/115/125/215/515/535/615/635 |
7 5/8 |
|
|
26'' |
114/115/125/215/515/535/615 |
7 5/8 |
|
TCIDrill BitPerformance
The roller cone bit has the functions of impacting, crushing and shearing the formation rock when it rotates, so the roller cone bit can adapt to various soft, medium and hard formations.
The 8 1/2'' inch IADC437 roller cone bit is suitable for low compressive strength and high drillability of large sections of very soft ground, such as shale, clay, sandstone, conglomerate, etc.
As one of drill bit manufacturers, we can offer sorts of hybrid drill bitfor sale, anything you need, please leave us a message.
Send product request
Other supplier products
 |
Hybrid Drill Bit | The hybrid bituses a mixed cutting method. The tricone bit is to be broken by impact on the stratum, and then the PDC blade is cut to effectively p... |
 |
5 Wings PDC Drag Bit | Drag bits for water well drillingby using a polycrystalline diamond compact cutter, has high hardness and wear resistance, the drag bit blade betwe... |
 |
PDC CUTTER | Artificial PDC cutter is composed of a layer of polycrystalline diamond cutters and carbide matrix, so it not only has the high hardness, high wear... |
 |
PDC DRAG BIT | The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body... |
 |
STEEL TOOTH BIT | The teeth of Steel Tooth Bit are made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of th... |
Same products
 |
railway signal torch tricolor railway signal light | Seller: 834406 | 铁路奇格尔灯 可广泛应用于铁路、船舶等交通运输行业和一些特殊行业，如信号指示、安全警示和工作照明。 |
 |
Grinding Head X 1/4inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X 1-3/16inch | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head X | Seller: Keying Abrasives | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s... |
 |
Grinding Head G - T Shape (T) | Seller: Keying Abrasives | KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc... |
