Dia1.5m L3.0m ship pneumatic fender to Indonesia
Dia1.5m L3.0m ship pneumatic fender to Indonesia
Pneumatic fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorb between two ships (ship-to-ship), or between ships and berthing structures when they come alongside each other on the water.
Features of pneumatic fender
(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.
(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of pneumatic fender, its adaptability is much higher than other fender
(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.
(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
(6)Florescence pneumatic fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock.
Different types of pneumatic fender
1.Net Type
Net-type fenders are covered with a chain net, wire net or fiber net for small size fenders. Usually these nets have used-tires together with rubber sleeves for additional protection, except fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.
2.Sling Type
Sling-type fenders Φ500×1000L - Φ4500×9000L have an attachment eye on each end for lifting and installation. Handling of sling type fenders is easy due to their lightweight.
Application of pneumatic fender
Pneumatic fenders are suitable for many applications including:
*Tankers, Gas Carriers and Bulk Cargo Ships;
*Fast ferries and aluminum hulled vessels;
*Temporary of permanent installations;
*Rapid response and emergency fendering;
*As stand-off fenders to realign ships with shore facilities.
Qingdao Florescence Rubber Products Co., Ltd is s a comprehensive marine supply enterprise, integrating the scientific research design, product development with technical services. We specialize in manufacturing Marine Rubber Fender, Foam Filled Fender, Marine Landing Balloon and other rubber products. Our products conform to International Certification. Our mission is to promote customers' development, to help become customers bigger and stronger and strive for the country's prosperity.
Send product request
Other supplier products
Pneumatic Marine Bumper Rubber Reefer Vessel Fender | Pneumatic Fender Florescence to be your best partner Pneumatic fendersare a leading anti-collision de... | |
Ship operation for dock berthing and mooring | Ship operation for dock berthing and mooring Marine floating fender which is made of synthetic-cord-reinforced rubber sheet with compressed ... | |
Marine mooring 50KPA ship floating pneumatic rubber fender | Introduction ofMarine mooring 50KPA ship floating pneumatic rubber fender Ship floating pneumatic rubber fenders are ideal for permane... | |
Jetty inflatable floating yokohama type pneumatic rubber fender | Florescence is a leading manufacturer for ISO 17357 pneumatic rubber fender/pneumatic fender/boat fenders, a leading anti-collision device for mari... | |
Marine Supplies Standard Size Pneumatic Marine Rubber Fender For Boat Fender | What is marine rubber fender? Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to floa... |
Same products
shipbuilding equipment 3D localizer | Seller: 837294 | Beijing CSTS Technology Co.,Ltd. is a professional import and export enterprise in China. mainly ... | |
Best Selling Products 2020 In Europe Amazon Freight Forwarder Logistic Fba Freight Shipping Cost China | Seller: Haoocean International Logistics(Shanghai)Co.,Ltd. | shipping | |
0210.29.030-1,CS35 ,C572,EZ13.1A,MC307.85,0210.29.030-1 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Our factory produce nozzle, plunger,injector,valve,etc,which used for the agricultural machinery ... | |
5×0,3×130,5×0,35×130,5×0,5×140,5×0,75×140,6×0,3×130,6×0,45×140 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Contact person : Yolanda Mobile & 5×0.3×130,5×0.35×130,5×0.5&... | |
Marine nozzle8x0,42x150 : 6CH 31/36 (D67) 6×0.3×130 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult... |