Ship dock pneumatic fender for boat berthing
Ship dock pneumatic fender for boat berthing
Pneumatic rubber fenders have become an ideal ship protection medium against collision among ship-to-ship (STS), ship to quay (STQ) and ship-to-berthing (STB), they are widely used for large tankers, vessels, docks, harbor wharfs and ocean platforms.
Pneumatic Rubber Fender Advantages:
1.Our pneumatic fender as a protective medium is suitbale for ship to ship contact, ship to dock and ship to berthing.
2.It is light weight,portable and floatable, can be installed, replaced easily and reused 6-8years without misuse.
3.We have provided pneumatic fenders to marine service and offshore service for varieties ships.
4.Low reaction force and high energy absorption fenders with CCS,BV certificate.
Classification of pneumatic rubber fender:
Fender types:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Test of ship dock pneumatic fender for boat berthing
1. Material test for rubber
The material test of the outer rubber and the inner rubber shall be conducted in accordance with the physical properties of inner and outer rubber required by ISO 17357:2002
2.Dimensional inspection
The dimension of all the fenders shall be inspected at the initial internal pressure and the results shall be within the following tolerances:
- length: +10%, -5%;
-diameter: +10%,-5%
3.Air-leakage test
The air-leakage test shall be conducted on all the fenders at initial pressure for more than 30 min, and the test results shall confirm that there is no air leakage.
4.Hydrostatic-pressure test
The hydrostatic-pressure test shall be performed for 10 min at the hydrostatic-pressure shown in "test pressure at 0% deflection". Maximum temporary elongation: 10%
Send product request
Other supplier products
 |
Ship operation for dock berthing and mooring | Ship operation for dock berthing and mooring Marine floating fender which is made of synthetic-cord-reinforced rubber sheet with compressed ... |
 |
Dia1.5m L3.0m 50KPA marine rubber fender for STS service | 1.What is marine rubber fender? Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to... |
 |
Dia1.5m L2.5m fishing boat pneumatic floating fender | Pneumatic rubber fenderhas been in use for around 50years. It is the leading anti-collision device for marine application in the world. This compre... |
 |
Ship Launching Inflatable Marine Rubber Airbag To America | Launching airbag Application ofShip Launching Inflatable Marine Rubber Airbag To America ... |
 |
Marine Supplies Standard Size Pneumatic Marine Rubber Fender For Boat Fender | What is marine rubber fender? Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to floa... |
Same products
 |
Best Selling Products 2020 In Europe Amazon Freight Forwarder Logistic Fba Freight Shipping Cost China | Seller: Haoocean International Logistics(Shanghai)Co.,Ltd. | shipping |
 |
0210.29.030-1,CS35 ,C572,EZ13.1A,MC307.85,0210.29.030-1 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Our factory produce nozzle, plunger,injector,valve,etc,which used for the agricultural machinery ... |
 |
5×0,3×130,5×0,35×130,5×0,5×140,5×0,75×140,6×0,3×130,6×0,45×140 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Contact person : Yolanda Mobile & 5×0.3×130,5×0.35×130,5×0.5&... |
 |
Marine nozzle8x0,42x150 : 6CH 31/36 (D67) 6×0.3×130 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult... |
 |
Marine plunger LT10 (10mm) :327-07-1， 25/34(16mm) CH 25/34 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult... |
