Exterior Matting agent M-60
Matting agent M-60
M-60 is a kind of exteriormattingagent. It is mainly used for Polyester/ TGIC powdercoating system and it is suitable for the gloss more than
The characteristic of M-60 is to offer the good mechanical property, excellent leveling property, smooth coating property and the perfect anti-yellowing property in the power coating.It is not sensitive to the extrusion processand it is suitable for wide range of polyester resin as well.
- Technical Parameters
- Appearance:white or lightyellow powder
- Bulk density:550-650 g / l
- Solid Content : 99%
- Product application and performance
- Matting agentM-60can besqueezeddirectly when pre-mixed withother materials in the process of production
- The powderpaints and coatings made from the M-60 is smooth and never getting yellow
- It is suitable for wide range of polyester resin, It can match themost of thepolyester and provide a goodmatting effect.
- You canchoose to addsuitableaccelerator/catalystto improveimpactperformance, but itmay causethe rise of coatingsurface glossand the reduce of the levelingperformance.
- The powder coatings made of the M-60has a good storage stability and excellent repeated extrusion performance.
- Recommendedextrusion temperature: I District95 ℃, IIDistrict110 ℃;recommendedcuring condition: 200 ℃ * 15min.
- Heavy metalcontents in theproductconforms to the requirment of EU Rosh standard.
- Recommended usage
The usage of M-60 is 1-4% of the total amount for powdercoating formulations,it is suitable for 10%@60degreesabovegloss, The more of the usage, the gloss will be lower. If you need much lower gloss, you can increase the dosage to 5% as appropriate.
Send product request
Other supplier products
 |
Matting agent M-10 | Matting agent M-10 M-10 is a kind of chemical matting agent without wax, which mainly suitable for polyester/epoxyhybrid powdercoating system.The c... |
 |
Benzoin | Benzoin Benzoin, also known as benzoin or diphenyl ketone alcohols, is the most common degassing agent in powder coating. When the powder coating i... |
|
|
Exterior Matting agent M-60 | Matting agent M-60 M-60 is a kind of exteriormattingagent. It is mainly used for Polyester/ TGIC powdercoating system and it is suitable for the g... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
