Lug Butterfly Valve

Features of Lug Butterfly Valve

Low opening torque, Radial dynamic balance sealing system is adopted, so that the forces on both sides of the inlet and outlet of the disc are roughly balanced;

Self lubricating bearing to reduce operating torque and avoid locking the valve stem infrequent opening and closing conditions;

Better Seal ring material, seal is made of stainless steel sheet with graphite/carbon fiber/PTFE, etc. More wear-resistant, impact-resistant, reliable, and environmentally friendly than rubber asbestos sheet material;

Packing-combined sealing system, ensure that the maximum leakage of the valve can reach ≤20ppm. The dynamic sealing structure can be used if necessary so that the packing seal is in good condition and the free maintenance period of the packing is extended.

Lug Butterfly Valve Working Principle

Full lug type butterfly valve has two options of fixed seat and floating seat, which can be repaired without leaving the site, which can shorten the repair time and greatly improve the efficiency. Fixed seats are suitable for valves where the medium flows forward, so the seal is only for one direction and the flow direction should be noted when installing. Although the valve seat is fixed, the sealing of the valve flap can still be removed. If the valve has a floating seat, it can be installed in any direction.

Lug Type Butterfly Valve Installationand Commissioning

Wafer lug type butterfly valveshould be stored in a dry, ventilated room, and the valve channel should be blocked at both ends. Long-term storage of the valve should be regularly inspected and cleared of dirt. Special attention should be paid to the cleaning of the sealing surface to prevent damage to the sealing surface. For specific use, please consult Zeco Valve Group.

Lug Butterfly Valve Material and Standard

Size Range: 2"~48"

Pressure Rating: 150LB ~ 300LB

Face to Face Dimensions: API 609, EN558

Flange End Dimension: EN1092, ASME B16.5, ASME B16.47, AS2129

Inspection and Test: API 598

Part	Material	Standard
Body	GGG40/WCB/CF8M/MONEL	ASTM STANDARD
Disc	GGG40/WCB/CF8M/MONEL	ASTM STANDARD
Stem	SS420/SS410/SS316/MONEL	ASTM STANDARD
Seat	HARD SEAL/PTFE/GRAPHITE	ASTM STANDARD
For materials options not listed, consult factory. Zeco manufactures valves in more than 50 different alloys.

As a china valve manufacturer, we have types of related products for sale, if you have needs, please contact us.

Other supplier products

	30 Inch Valve	The 30 inch is mainly used for a small number of performance valves to regulate flow, for filtering, and for butterfly and gate valves to be used a...
	Fire Protection Groove end Concentric Butterfly Valve	Basic informationThisvalvecan be used to cut off, switch on and adjust the medium in the pipeline.Features1. Disc and stem are connected without th...
	Motorized Butterfly Valve	As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan...
	Motorized Ball Valve	Description of Motorized ball valve: ZECOmotorized ball valvecan provide explosion-proof electric actuators. Explosion-proof electric actuators are...
	Double Offset Butterfly Valve	Double offset butterfly valve manufacturersare further improved on the basis of single eccentric butterfly valves and are widely used. Its structur...

供应产品

Same products

	FT wax used for EVA-based hot melt adhesive	卖方: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	卖方: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	卖方: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	卖方: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	卖方: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...