Steel Bar Testing
The steel bar is rolled by a rolling mill and produce both surface defects and internal defects during the rolling process. The internal defect is that the original defects of the steel chain or billet are extended during the rolling process. These defects are mainly concentrated in the central part of the steel rod. The forms mainly include slag inclusion, shrinkage, delamination, and looseness. The amount of rolling deformation increases and increases. In actual production, these internal defects of the steel rod have a serious impact on the performance of the steel. For example, steel rods used for forging, these internal defects will continue to exist inside the steel rod during the forging process, and some will continue to extend. Some will form a mezzanine. Therefore, the non-destructive testing of the internal defects of steel bars has attracted more and more attention.
Ultrasonic automatic detection system for steel bars
The ultrasonic automatic detection system for steel bars is a device that uses ultrasonic longitudinal wave detection to detect defects such as delamination and inclusions inside the steel bar. The steel rod enters a six-way ultrasonic probe that rotates at a high speed through a communication mechanism, and each channel is set to a different frequency. The steel rod advances at a low speed, so it can cover 100% of the surface of the steel rod. After the steel rod enters the ultrasonic system, the system begins to detect.
When a defect is detected, the probe will feed back the defect signal. The defect signal is processed, amplified, converted to the oscilloscope, and the oscilloscope is transmitted to the computer. The program in the computer responds accordingly, that is, the defect location is identified. In the subsequent production, the marked steel bar will be cut off, thereby avoiding the quality problems caused by the internal defects of the steel bar.
As a non destructive testing equipment manufacturer and supplier, we have been committed to developing and manufacturing high-quality and high-performance NDT equipment to provide customers with the best quality service.
BKNis one of the best ultrasonic testing equipment manufacturers,we have ndt ultrasonic testing equipment,ultrasonic testing of steel barsand steel bar test,RFQ today.
Send product request
Other supplier products
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator | Eddy Current Brake for Sale Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by th... | |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. A... | |
BKNET-101 Automatic Eddy Current Testing | The eddy current testing (BKNET-101) is a fully automated eddy current inspection system that uses large-scale imported integrated circuits combine... | |
Automatic EDM Notch | Automatic EDM Notchis a kind of EDM notch machine, and it is the ideal equipment for processing artificial defects of pipe rod standards in non-des... | |
EDM Notch 1024 | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
Same products
Shoes Flexing Tester | Seller: Qinsun Instruments Co., Ltd | It's used for determining the flexibility resistance and or indicating the cracks od shoe or shoe... | |
Shoelace Abrasion Tester | Seller: Qinsun Instruments Co., Ltd | Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion... | |
Heel Fatigue Tester | Seller: Qinsun Instruments Co., Ltd | Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’... | |
Heel Impact Tester | Seller: Qinsun Instruments Co., Ltd | Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Ap... | |
Ross Flex Tester | Seller: Qinsun Instruments Co., Ltd | Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sol... |