Plastic Injection Mould Tooling
Plastic molds are tools that are matched with plastic mold making machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. Due to the wide variety of plastics and processing methods, and the complex and simple structures of plastic injection mold making machines and custom injection molded products, the types and structures of plastic molds are also diverse.
Mold Making
As a professional injection mold components suppliers, we complete all plastic injection mould making, from cutting materials to cavity carving, and then to the final assembly. We have advanced high-speed milling machines, electric discharge machines, wire cutting machines, and engraving machines to ensure that the machining accuracy can meet the requirements.
Mold Making
Generally, the mold is not directly regarded as the final product when it is designed, because it will have such or other defects after it is produced. However, this type of defect There is no guarantee that they will be completely avoided before manufacturing. During the manufacturing process, there may be phenomena that cannot be stored and processed. Therefore, it is necessary to go through the trial model, and then analyze, evaluate and optimize the samples produced by the trial model to meet the requirements. High quality requirements. However, most of the defects of plastic mould tooling products are caused during the plasticization and injection molding stages, and may also be caused by improper manufacturing of plastic molds. Therefore, in order to avoid product defects caused by mold design in injection molding process steps, it is necessary to analyze when making molds. Mold design and process parameters.
Sample Confirmation
The acceptance of the part shall be carried out at least 16 hours after the completion of the molding of the plastic part or the required post-treatment.
The matching dimensions of injection molding mold products refer to the matching dimensions between products or between injection moulding products and related components, including partial matching dimensions and overall relative position dimensions.
When the inspections of basic dimensions, external dimensions, and matching dimensions are completed and the design requirements are basically met, trial assembly inspection can be carried out. This is a very important means in product inspection. It can verify the matching dimensions and verify the space surface.
When the pre-installation meets the requirements, the apparent quality of the part needs to be comprehensively inspected. At this time, the apparent quality refers to whether the apparent quality meets the requirements under the condition that there are no common defects.
As one of the most professional injection mold components suppliers, Keyplast offers plastic injection molding service, plastic mold fabrication, mold tryout, plastic mould fabrication, plastic injection china, etc. Keyplast sincerely invite you to visit our company and establish long-term business relationship with us. Contact us to know cost of manufacturing plastic productsor more.
Send product request
Other supplier products
 |
Over Molding | Over moldingof keyplast is a special plastic molding process. Overmolding custom injection moldingis similar to the two-color molding or two-shot m... |
 |
Injection Molding Surface Finish | Injection Molding Surface Finish Do not use the finest whetstone, sandpaper, or abrasive polishing paste at the beginning of mold polishing, as yo... |
 |
Insert Molding | Insert molding serviceis one category of injection molding that allows preformed parts or components, usually metal inserts, to be inserted into th... |
 |
Processing Performance and Conditions of ABS Injection Molding | Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic pa... |
 |
Injection Moulding Applications | Since 1980, Keyplast has involved in different industries and markets for 40 years. As a professional custom plastic parts manufacturer, we have ex... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Seller: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Seller: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
