Metal Dome Type Splice Closure for Opgw Cable
COMPONENT
inner armor rods,middle outer outer armor rods, thimble, U-shaped hanging loop, PD hanging board, triangular conjoint board, bolt, nut, etc.
CHARACTERISTIC
1. It has all capabilities and performances that dead-end suspension has.
2. The three-layer outer armor rods improve the mechanical intensity of the clamp, making it realizable to install huge optical cables under the special conditions such as big span and high fall.
CONDITIONS FOR THE USAGE
Special situations such as rivers with greater span, valleys with higher fall, and the situations which is not constrained by conditions such as the line angle.
INTENSITY
160-300KN can be applied according to users＇requirement.
Description
| Model |
Grip(KN) |
Length of Inner Armor Rods(mm) |
Length of Middie Outer Armor Rods(mm) |
Length of Outer Armor Rods(mm) |
Estimated Weight (KG) |
Color |
| OSNZ-160-* * |
160 |
2400 |
1800 |
1600 |
14.9 |
Yellow |
| OSNZ-210-* * |
210 |
2800 |
2200 |
2000 |
20.9 |
Yellow |
| OSNZ-250-* * |
250 |
3100 |
2400 |
2200 |
27.1 |
Yellow |
| OSNZ-300-* * |
300 |
3200 |
2600 |
2400 |
33.8 |
Yellow |
NOTE**representing the outer diameter of the optical cable (mm).
Other supplier products
|
|
Metal Dome Type Splice Closure for Opgw Cable |
FUNCTIONIt eliminates or reduces the vibrations that come from the effect of laminar flow wind, and prevents damage of the hardware fittings and t... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
Preformed armor rods forming machine： 1.Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protectio... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket e... |
|
|
Overhead Line Fittings for Electric Power |
Vibration Dampers for OPGW (4D)COMPONENTzincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.FU... |
供应产品
Same products
