Metal Perforated Plate Corrugated Packing

Metal perforated plate corrugated packing is made from perforated plate with channel corrugation on surface, and remains structure feature of metal wire gauze packing. It strengthens uniform liquid distribution and surface wetting ability, which increases mass transfer efficiency. The unit height is 50-200 mm per coil, and the packing is prepared in blocks when diameter is larger than 1.5 m.

It is formed from vertical sheets of corrugated metal with the angle of the corrugation reversed in adjacent sheets to form an open structure with inclined flow channel. Its structure can not only change the distribution of liquid, but also increase the transfer efficiency.

Feature

Strong resistance to fouling.
Low resistance, even gas and liquid distribution.
High efficiency, large flow rate and unremarkable magnifying effects.
It's applied to negative pressure, normal pressure and pressurization operation.
Application
Metal perforated plate corrugated packing is widely used in unit operations like rectification, absorption and extraction.

According to packing types, the applicable minimal tower diameter is 80-200 mm while maximal tower diameter reaches 13 m, liquid spray density ranges from 0.2 to 200 m3/(m2?h) and pressure ranges from vacuum to high pressure. For these reasons, it is a type of all-purpose efficient structured packing suitable for chemical industry, chemical fertilizer industry, oil refining, petrochemical industry and natural gas industry.




Send product request

To: Boegger Industrial Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Knitted Structured Packing
Knitted Structured Packing Knitted structured packing is suited for applications that demand high separation efficiency with a lower pressure drop. The packing is made from ...
Sheet Metal Packing
Sheet Metal Packing Sheet metal packing gets greater surface area per cubic foot than random packing of equal capacity. A series of perforated vertical corrugated laye...
Metal Perforated Plate Corrugated Packing
Metal Perforated Plate Corrugated Packing Metal perforated plate corrugated packing is made from perforated plate with channel corrugation on surface, and remains structure feature of metal...
Metal Structured Packing
Metal Structured Packing Specification Material: Stainless Steel 304, 304L, 316, 316L, 410, Carbon Steel. Type: 125X/Y, 250X/Y, 350X/Y, 500X/Y, 700X/Y. The metal packing i...
Expanded Metal Prick Corrugated Plate Packing
Expanded Metal Prick Corrugated Plate Packing Expanded metal prick corrugated packing is perforated very small holes, and then is pushed to corrugated sheet; finally it is assembled to coil. It...
All supplier products

Same products

FX3U-128MT/ES-A MITSUBISHI PLC
FX3U-128MT/ES-A MITSUBISHI PLC Seller: Nanjing Meily Mechanical and Electrical Equipment Co.,Ltd. contact: Helen Ye Tex: +86 25 52328744...
Q64AD2DA 4 channel Mitsubishi Anolog Module
Q64AD2DA 4 channel Mitsubishi Anolog Module Seller: Nanjing Meily Mechanical and Electrical Equipment Co.,Ltd. contact: Helen Ye Tex: +86 25 52328744...
Mitsubishi GT2105-QMBDS touch screen
Mitsubishi GT2105-QMBDS touch screen Seller: Nanjing Meily Mechanical and Electrical Equipment Co.,Ltd. contact: Helen Ye Tex: +86 25 52328744...
AW30-03BDE-B, SMC regulator 3/8 inch from Japan
AW30-03BDE-B, SMC regulator 3/8 inch from Japan Seller: Nanjing Meily Mechanical and Electrical Equipment Co.,Ltd. contact: Helen Ye Tex: +86 25 52328744...
ISITMAX Housing Type Mirror Heating Film
ISITMAX Housing Type Mirror Heating Film Seller: Isitmax Heating Systems ISITMAX Housing Type Mirror Heating Film used for mirror's clearness after hot and steamy shower....