Metal Perforated Plate Corrugated Packing
Metal perforated plate corrugated packing is made from perforated plate with channel corrugation on surface, and remains structure feature of metal wire gauze packing. It strengthens uniform liquid distribution and surface wetting ability, which increases mass transfer efficiency. The unit height is 50-200 mm per coil, and the packing is prepared in blocks when diameter is larger than 1.5 m.
It is formed from vertical sheets of corrugated metal with the angle of the corrugation reversed in adjacent sheets to form an open structure with inclined flow channel. Its structure can not only change the distribution of liquid, but also increase the transfer efficiency.
Feature
Strong resistance to fouling.
Low resistance, even gas and liquid distribution.
High efficiency, large flow rate and unremarkable magnifying effects.
It's applied to negative pressure, normal pressure and pressurization operation.
Application
Metal perforated plate corrugated packing is widely used in unit operations like rectification, absorption and extraction.
According to packing types, the applicable minimal tower diameter is 80-200 mm while maximal tower diameter reaches 13 m, liquid spray density ranges from 0.2 to 200 m3/(m2?h) and pressure ranges from vacuum to high pressure. For these reasons, it is a type of all-purpose efficient structured packing suitable for chemical industry, chemical fertilizer industry, oil refining, petrochemical industry and natural gas industry.
Other supplier products
|
|
Metal Wire Gauze Structured Packing |
Metal wire gauze structured packing is an important milestone of the development of clear and neat filling. This kind of filling consists of arrang... |
|
|
Grid Structured Packing |
Grid structured packing combines high surface area of traditional structured packing and rugged construction of the common grid configuration. It c... |
|
|
Expanded Metal Prick Corrugated Plate Packing |
Expanded metal prick corrugated packing is perforated very small holes, and then is pushed to corrugated sheet; finally it is assembled to coil. It... |
|
|
Laboratory Structured Packing |
Laboratory structured packing is a kind of small diameter structured packing which is range from 20 mm to 80 mm. For small laboratory column diamet... |
|
|
Metal Structured Packing |
Specification Material: Stainless Steel 304, 304L, 316, 316L, 410, Carbon Steel. Type: 125X/Y, 250X/Y, 350X/Y, 500X/Y, 700X/Y. The metal packing i... |
供应产品
Same products
