Flotation Machine
Technical Advantage:
This equipment has the following features:
1. Breathe in large volume, low power consumption.
Each slot with inspiratory, plasma and flotation triple, its flotation circuit without any auxiliary equipment, the level of configuration facilitate the process of change.
2. Pulp cycle is reasonable, can minimize the coarse sand precipitation.
3. Impeller with a tilt of the upper and lower blades. Leaves produce pulp on circulation, next leaves produce pulp cycle.
4. XJK flotation machine is mainly used for choose gold, silver, copper, iron, lead, zinc, molybdenum, nickel, aluminum and other metal minerals. It can also be used to black metal and nonmetal .
Product features
The structure of flotation machine: This machine is mainly composed of bearing slurry tank, mixing device, pneumatic device, eduction mineralization bubble device, motor, etc.
For slurry tank: It has into the pulp, also can adjust the pulp of gate device, it is mainly composed of steel plate welded in the tub and steel plate and welding cable clip into the gate.
Mixing device: It is used for mixing pulp, prevent sand settled in the tub, it mainly consists of pulley, impeller, and other components of the vertical axis, the impeller is made of wear-resistant rubber.
Charging device : It consists of catheter intake pipe, when rotating impeller, the impeller chamber in produce negative pressure, the air through the hollow handle inhaled, and dispersion in the formation of air bubbles in the pulp, this contains a large number of bubbles pulp by leaves the rotation of the wheel force and was soon thrown to the stator, and further to make the bubbles in pulp refining, and eliminate the rotation of the pulp flow in the flotation tank movement, caused a large number of vertical rising micro bubble, provide necessary conditions for the flotation process
Eliminate mineralized bubbles: It is will be floating in the bubble on the surface of the slot blowing out, mainly driven by the motor reducer, gear reducer drive scraper
Operating principle:
The grinding ore while in grinding or ground water and necessary reagents by mixing tank into pulp, inject began to stir the pulp chamfer, to import the air in the pulp, which formed a large number of bubbles and some not wet by water, that is generally called the hydrophobic mineral particles in the air bubble, and with bubbles float to the surface of a pulp, mineralized bubbles formation layer, some easy to wet by water, which generally called hydrophilic mineral particles not attached on the bubble, but staying in the pulp will contain certain minerals of mineralized bubbles, so as to achieve the aim of mineral processing.
Application:ore dressing
Material:Used in colored black metal, also can be used for nonmetal such as: coal, fluorite, talc.
| Model |
SF0.37 |
SF0.7 |
SF1.2 |
SF2.8 |
SF4 |
SF8 |
| Trough capacity(m3) |
0.37 |
0.7 |
1.2 |
2.8 |
4 |
4 |
| Blade diameter(mm) |
300 |
350 |
450 |
550 |
650 |
750 |
| Capacity (m3/min) |
0.2-0.4 |
0.3-0.9 |
0.6-1.2 |
1.5-3.5 |
0.5-4 |
4-8 |
| Blade rotation speed(m3/min) |
352 |
400 |
312 |
268 |
238 |
191 |
| Motor |
Model |
①Y90L-4 |
①Y100L2-4 |
①Y132M2-6 |
①Y160L-6 |
①Y180L-6 |
①Y250M-8 |
| ②Y90S-4 |
②Y90S-4 |
②Y90S-4 |
②Y90S-4 |
②Y90L-4 |
②Y100L-6 |
| Power(KW) |
①1.5 |
①3 |
①5.5 |
①11 |
①15 |
①30 |
| ②1.1 |
②1.1 |
②1.1 |
②1.1 |
②1.5 |
②1.5 |
| Overall dimensions(mm) |
700×700×750 |
900×820×950 |
1100×1100×1100 |
1700×1600×1150 |
1850×2050×1200 |
2200×2900×1400 |
| Single trough weight(kg) |
468 |
600 |
1373 |
2338 |
1660 |
4486 |
Other supplier products
|
|
Spiral Chute |
Product advantage:This equipment applies to the size 0.3--0.02 mm fine material such as iron ore, ilmenite, chromite, sulfurous iron ore, zircon, r... |
|
|
Heavy Hammer Crusher |
Product advantage:Hammer Crusher with low investment, high yield, the fastest known, renowned in the industry. Sunstone hammer crusher only broke o... |
|
|
Jaw Crusher |
1.Good stability, high reliabilityMoving jaw Assembly adopts the high quality casting components,heavy eccentric axis also forging billets for proc... |
|
|
Intermittent Ball Mill |
Intermittent Ball Mill is mainly used for materials, grinding, the fineness of the product is uniform, save power. The machine can be dry grinding,... |
|
|
Sand Washer |
1.Large in capacity and production cost is lowSingle highest yield can reach 180 tons /h, basically satisfied the demand of customers washing sand.... |
All supplier products
Same products
