Footwear Flexing Tester
Product Introduction:
The finished shoe resistance zigzag tester drives the zigzag part of the finished shoe to zigzag repeatedly with the zigzag Angle matched by the shoe type and the fixed rate of the zigzag machine. After reaching the preset time or completing the specified zigzag number, the damage of the zigzag part of the finished shoe is observed and tested. To complete the number of twists and turns without damage or complete the specified number of twists and turns of the finished shoe to evaluate the zigzag resistance of the finished shoe.
Reference standard:
SATRA TM92 and other standards.
Main functions:
Test sports shoes, casual shoes, work shoes and other finished shoes, after a long time, fixed frequency, fixed Angle of continuous bending, evaluate its folding performance or check its cracking degree.
Product Advantages:
Measures Finished Shoe Durability: Evaluates the flexing resistance of the entire shoe under simulated walking conditions, providing a realistic assessment of its durability.
Standard Compliant: Designed to meet relevant standards for finished footwear flexing resistance testing.
Multiple Testing Stations: Allows testing of two pairs of shoes simultaneously, increasing testing efficiency.
Controllable Test Parameters: Provides precise adjustment of bending angle and flexing speed to match different shoe types and test requirements.
Quantitative Evaluation: Results are based on the number of flexing cycles, either to a certain level of damage or to a specified total.
Suitable for Various Shoe Types: Applicable to a range of finished footwear, including sports, casual, and work shoes.
Includes Cycle Counter: The integrated counter provides an accurate record of the number of flexing cycles performed.
Precise Speed Control: The variable frequency motor ensures accurate and stable test speeds.
Technical specifications:
1. Two pairs of shoes can be tested at the same time
2. Zigzag Angle: adjustable from 5 to 90°
3. Resistance to zigzag speed: 5 to 150cpm adjustable (with speed display)
4. Permissible sample length: 150 to 400mm
5. Volume: 105*83*78cm
6. Motor: variable frequency motor
7. Counter: LCD,0-9999.999
9. Power: AC220V, 10A
Send product request
Other supplier products
 |
Textile Air Permeability Tester | Meet the standard: ASTM D737 ISO 9237 EDANA WSP 070.1 JIS L1096 Product Introduction: Air permeability is defined as the volume of air that... |
 |
Thermal - Cold Cycle Testing Machine/ Cold and Hot Cycle Tester / Environmental Thermal Cycling Tester | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification... |
 |
G259A Sweating Guarded Hotplate-EN ISO11092 ASTMF1868-09 | Standards: GB/T11048. ISO11092. ASTMF1868-09. BS8515. ASTMD1518-2014. JIS L1096-2010. ASTM F 1868-02 Product Information: G259A Sweating Guarded... |
 |
Paper stiffness meter | Paper stiffness meter - Other test instrument - standard Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measur... |
 |
Shoe heat insulation testing machine -- sand bath/ Sand Bath Thermal Conductivity Tester / Shoe Heat Insulation Tester | Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard f... |
Same products
 |
Scott Flex Tester | Seller: Standard International Group (HK) Limited | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | Seller: Standard International Group (HK) Limited | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
