Shoelace Abrasion Tester
Application:
This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet.
Standards:
SATRA TM93
Principle：
Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eyelet form into 90 degree, make the fiber board and shoelace form into 45 degree. Then straining reciprocated the shoelace under the standard tension by eyelet. While the shoelace is damaged, stop the testing.
Product Advantages:
Measures Key Durability of Lacing System: Evaluates the wear resistance of both shoelaces and eyelets, critical for footwear performance and lifespan.
Standard Compliant: Designed to meet standards like SATRA TM93. ensuring recognized and comparable test results.
Quantitative Result: Provides objective data, typically the number of cycles to failure.
Controllable Test Parameters: Allows for precise setting and control of tension, stroke length, and test speed.
Multiple Testing Stations: Equipped with multiple positions (6) for simultaneous testing, increasing efficiency.
Simulates Realistic Abrasion: The setup and reciprocating motion simulate the rubbing action that occurs during footwear use.
Versatile Application: Suitable for testing various types of shoelaces and eyelets.
Product Features:
Multiple test positions or stations (6 positions) for simultaneous testing of multiple shoelace-eyelet pairs.
Mechanism to securely clamp a standard eyelet mounted on a fiberboard.
System to position the shoelace and eyelet at specified angles (90 degrees and 45 degrees).
Tensioning system that applies a standard load to the shoelace using weights (455g ± 5g per position, 6 weights included).
Mechanism to reciprocate the shoelace back and forth through the eyelet with a controlled movable stroke (76 ± 2 mm).
Controllable test speed (100 ± 5 cpm) for the reciprocating motion.
Touch-screen control interface for setting test parameters and monitoring the test.
Integrated digital counter (0-999.999 range) to track the number of abrasion cycles performed.
Designed to utilize standard eyelets (Brass, Inner diameter: 4.5mm) and fiberboard (25$times$25mm, Inner diameter 5.0 ± 0.2mm).
Robust construction suitable for repetitive abrasion testing.
parameters：
Position：6 positions
Weights：455g ± 5g , 6pcs
Control method：Touch-screen control, 0~999.999
Standard eyelet：Brass, Inner diameter: 4.5mm
Fiberboard：25×25mm, Inner diameter 5.0 ± 0.2mm
Movable stroke：76 ±2 mm
Test speed：100±5cpm
Power supply：1∮AC 220V 50/60HZ
Dimensions(W×D×H)：57x58x1025px
Weight(approx.)：60 kg(excluding weight)
在线联系供应商
Other supplier products
 |
Carbon Black Content Tester/ Rubber Carbon Black Tester / Carbon Black Concentration Tester | Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and as... |
 |
Cylindrical Battery In-Situ Volume Swelling Testing System | Standard UL 1642: Standard for Lithium Batteries IEC 62660-2: Secondary Lithium-Ion Cells – Part 2: Reliability and Abuse Testing ASTM E... |
 |
Spring torsion fatigue testing machine | Product Introduction: Spring torsional fatigue testing machine （horizontal） is a new type of automatic torsional fatigue testing machine with digi... |
 |
digital elmendorf type tearing strength tester | digital elmendorf type tearing strength tester - Textile and Apparel - standard The Digital Elmendorf Tearing Tester is using Elmendorf method to ... |
 |
Intramedullary Nails Internal - fixation Pull - out Force Tester | Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—... |
Same products
 |
Scott Flex Tester | 卖方: 标准集团 | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | 卖方: 标准集团 | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
