MF1K Pearl Colors
1、MF1K Pearl Colors
Automotive Paint company
Product Name/Model:MF1K Pearl Colors
Characteristic:MF1K Pearl Colors with excellent leveling property,easy construction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Substrates |
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
MixingRatio |
MF1K Pearl Colors |
Thinner |
|
1 |
1 |
|
|
＜15℃ |
MF1K Pearl Colors |
60 Fast Thinner |
|
15-30℃ |
MF1K Pearl Colors |
61 Standard Thinner |
|
＞30℃ |
MF1K Pearl Colors |
62 SlowThinner |
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
ReTreatment |
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 3-5kg/cm²Suction Feed: 1.4-1.6mm 3-5kg/cm² |
|
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
Shelf Life |
2 years in original sealed can, cool and dryplace at 25℃. |
|
|
Package |
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
Send product request
Other supplier products
 |
MF-680 Extra Fast Clear Coat | MF-680 Extra Fast Clear Coat. Automotive Paint company Product Name/Model:MF-680 Extra Fast Clear Coat. Characteristic:Extra fast drying clear... |
 |
BYTC15 Extra Fast Clear Coat. | BYTC15 Extra Fast Clear Coat. Auto Coatings Product Name/Model：BYTC15 Extra Fast Clear Coat. Characteristic: Extra fast drying clear coate, high g... |
 |
DG2K-Solid Colors | DG2K-Solid Colors Auto Refinish Paint Product Name/Model:DG2K-Solid Colors Characteristic:DG2K Solid Colors, high gloss and build, good performa... |
 |
MF936-Matting Agent. | MF936-Matting Agent. Refinish Automotive Paint Product Name/Model:MF936-Matting Agent. Characteristic: Used to reduce the brightness of paint film... |
 |
BYTF600-Plastic Primer | Auto Coatings Product Name/Model：BYTF600-Plastic Primer Characteristic: Single-component transparent fast drying primer, used to promote adhesion... |
Same products
 |
Key Quality Factors in Food Contact Paper Production | Seller: Zhejiang Guanghe New Materials Co., Ltd. | Guanghe supplies food-grade parchment paper for commercial bakeries, food processors, restaurants... |
 |
Parchment Paper Supplier | Seller: Brightime Global Limited | Parchment Paper Supplier Parchment Paper , also known as baking paper, is a versatile kit... |
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
