PE80/PE100 Polyethylene pipe for gas
PE gas pipe Features:
* Corrosion. Polyethylene is an inert material, except for a few strong oxidant, can be resistant to a variety of aggressive chemical media, no electrochemical corrosion, no coating.
* Does not leak. PE gas pipeline mainly welding connection (hot melt connection or fused connection), compared with the rubber ring type joints or other mechanical joints, is not dangerous because of distortions caused by leaking joints exist.
* Good resistance to scratches capacity. Effective against scratches caused by stress concentration in the material, may greatly reduce the pipeline damage.
* High toughness. PE gas pipe is a high toughness pipe, its elongation at break generally more than 500 percent, based on the pipe's ability to adapt to uneven settlement is very strong. Is an excellent seismic performance of the pipeline.
* Excellent flexibility. Flexible polyethylene PE gas pipe can make the disk volume. Not slotted for construction, easy to PE gas pipeline in accordance with the requirements of the construction methods were changed.
* Advanced fused pipe structure. Non-exposed spiral heating wire to ensure the weld zone uniform heat conduction, and effectively put an end to the short circuit occurs when the pipe inserted into the phenomenon, while avoiding an exposed electric wire prone to aging corrosion defects and pipe inner wall smooth, easy to install .
* Good resistance to rapid crack pass. Rapid crack pipe refers accidental crack in the pipeline, at a speed of several hundred crack m / s growth, resulting in tens of meters or even a large instantaneous km pipe rupture accident. Actual use has not yet found a fast split polyethylene gas pipe.
* Long life, up to 50 years.
Our company using high quality raw materials to produce PE gas pipe, with production of PE gas pipe pressure piping components necessary for the production license of special equipment manufacturing license, manufacture caliber de20-1000mm, reputation-based, improve services,welcome to contact us.
在线联系供应商
Other supplier products
|
|
PE80/PE100 Polyethylene pipe for gas | PE gas pipe Features:* Corrosion. Polyethylene is an inert material, except for a few strong oxidant, can be resistant to a variety of aggressive c... |
 |
Hot Sale UHMWPE plate | Introduction: UHMWPE is polyethylene with a molecular weight numbering in the millions, usually between 3.1 and 5.67 million. The high molecular w... |
 |
20-1000mm large diameter HDPE pipe for water | Grade HDPE100 HDPE pipe price for water supply Material: HDPE100Sizes: 20mm--1000mm SDR: SDR11,SDR13.6,SDR17,SDR21,SDR26,SDR33 Pressure: 0.4Mpa, 0... |
 |
PE80/PE100 Polyethylene pipe for gas | PE gas pipe Features:* Corrosion. Polyethylene is an inert material, except for a few strong oxidant, can be resistant to a variety of aggressive c... |
 |
UHMW-PE plate | UHMW-PE plate features: 1. High impact resistance 2. High wear resistance 3. Anti-corrosion 4. Non-fouling 5. weathering and aging resistance 6. ... |
