Plastic Injection Molding
With more than 20 years of experience in the injection molding industry and equipped with ISO Class 8 Clean Room, Packson plastic injection moulding factory offers Medical Contract Plastic &Rubber Injection Molding, Custom Injection Molding, Insert Molding and Over Molding by more than 40 injection machines that range from 10 to 1000 tons of clamping pressure and are keep growing every day.
As one of the plastic injection molding companies in China , Packson is an ISO 13485 and ISO 9001 certified plastic injection moulding manufacturer . We are a cutting-edge company that specialized in plastic injection molding and contract manufacturing for OEMs like BD, Lear, and Wondfo. Except for Medical, we also work for different industries such as Automotive, Airplane Components, Electronic Products, Consumer Products, Packaging, Toys, Construction, and Agriculture.
Not all customers will place an order of a million parts to get started. We are able to produce customized plastic injection molding qty according to your personal solution and fulfill your needs. We will check color, appearance, and tolerance by quality control at every step during the manufacturing process of medical injection molding.
Our plastic injection manufacturer's great efficiency and good control that convert into a better quality product with a more competitive price by investment in equipment and QC system. This is also the most important factor that we can provide good quality plastic injection molding parts on time.
Plastic Injection Molding Details and Options
Packson Injection Molding Capabilities
Prototyping On-Demand Production
Lead time Make your mind in real in 10-25 days; including 24-hour quote responses with design-for-manufacturing (DFM) feedback Make your mind in real in 20-40 days; including 24-hour quote responses with design-for-manufacturing (DFM) feedback
How to Choose Complete design or equipment iterations and evaluate cost or manufacturing compromises.
The primary objective is to reduce design risks, enhance R&D productivity and accelerate product commercialization.
Typical Volume: Less than 5,000. The design and configuration are finalized and the aim is to supply chain risks, quality and TCO.
Consistency in production parts is critical.
Requiring inspection files and information on casting ability.
Mold Cavities Single & family molds Single, multi-cavity, and family molds;
Machines Available 10-1000 press tonnage
Inspection and Certification Options ISO9001,ISO13485,ISO 7&8 Medical Clean Room Molding
Mold Life Less than 5000 shots Unlimted
The Tolerances in the Steel Achieve the tightest tolerance ±0.005mm/0.002inch
The Tolerances in the part Achieve the tightest tolerance ±0.01mm/0.004inch
Inspection Documentation Critical-to-Quality First Article Inspection
Critical-to-Quality 30-part capability study
Critical-to-Quality dimensions checked during all runs
Scientific molding process validation report
CMM measurement technology
Other Options Consultative Design and Tool Services for free
Final Finishing Options
No MOQ
Quick-turn shipping in as fast as 1 day
Make Possible With Packson - Your Professional Plastic Injection Molding
Equipped with 10,000 square foot plastic injection molding factory and facility, Packson plastic injection molding company is located in Dongguan, Guangdong. We build all kinds of molds from easy prototyping to full production molds like multi-cavity,2K mold, liquid silicone rubber mold, inserting mold, and our molding press up to 1,000 tons. Packson plastic injection molding company uses world-leading equipment including CAD/CAM, high-speed CNC machines, wire-cut EDMs imported from Switzerland, milling machines, drill machines also grinders. Our experienced team of engineering, plastic injection molding makers are able to work together to build good molds for the production molding part. What kind of part do you need to make? No matter what, you can count on Packson plastic injection molding company and we will help you convert your idea into reality by our professional teams.
Apart from good teams of plastic injection molding companies in China, the following points are also very important for us to be a good plastic injection molding manufacturer:
Equipped with ISO class 8 Clean Room
Scientific Injection Molding Technology
Well-developed QC system
7 Steps In Plastic Injection Molding Service
7 Steps in the plastic injection molding process cycle:
Filling material into the barrel
Plastic resin is supplied in raw granules. They are dried to the correct water content, and then if needed, they can be mixed with coloring masterbatches or pigments.
Melt and Mix material
The dried granules are placed in the feed hole of the molding machine. An alternative screw inside the machine barrel will carry these materials to the mold while
heating them.
Closes Mold
Every half of the mold is fixed to the injection molding machine. A half is permitted to be moved. The hydraulic clamping unit pushed the mold halves together and exerts enough force to hold the mold tightly shut while the granules are injected. These two partial mould will be pushed together by the hydraulic system in order to hold the mold tightly shut while the granules are injected. The time it takes to close and tighten the mold depends on the machine-large clamping forces) will take longer.
Inject the plastic into the cavity of the mold
The injection molding pushed raw material into a mold. In this process, the melted plastic is then injected into the mold very rapidly and the pressure packs build up and hold the material. The injection time is hard to calculate precisely because of the complex and changing flow of melted plastic in the mold. But it can be estimated depending on the volume injected, the pressure, and power.
Cooling melted material in the cavity.
The melted plastic inside the mold starts to cool when it touches with inside surfaces of the mold. While the plastic cools, it will freeze in the shape of the required part. But there may be some appear sink marks on the part in the cooling. Packing the material at the injection enables an extra material to drain into the mold and reduce the amount of visible shrinkage. The mold can't be opened unless the necessary cooling time has passed.
Open mold
These two halves of mold will be split by a hydraulic system as well.
Ejection
Once the time has elapsed, the cooled part can be ejected from the mold through the ejection system which is fixed to the back half of the mold. Once the mold is opened, the part will be pushed out by the mechanism. The force must be suited to eject the part as when cooling, the workpiece shrinks and adheres to the mold.
As one of the most professional injection molding companies, Packson Mold provides custom molding services, plastic molding and manufacturing, plastic injection moulding services, medical grade plastics injection moldingand etc. Want to know more, contact us.
在线联系供应商
Other supplier products
 |
CNC Metal Machining Parts | Packson is a contract manufacturer specializing in CNC Milling, CNC Turning, CNC Drilling services in China. We are able to manufacture plastic mac... |
 |
Custom Metal Machining Parts | Packson provides our customers a various CNC machining services to our customers, including milling, turning, grinding, drilling and more. Our t... |
 |
Silicone Rubber Injection Molding | Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injectio... |
 |
Custom Metal Machining Parts | Packson provides our customers a various CNC machining services to our customers, including milling, turning, grinding, drilling and more. Our t... |
 |
2K Injection Molding | 2K Plastic Injection Moulding ISO Class 8 Clean Room Quality Control Low & High Volume Manufacturing Competitive Price Reliability an... |
Same products
 |
Fresh Young Coconut | 卖方: Song Nam ITD Co., Ltd | Fresh Young Coconut is an organic fresh fruit and whole year round in Vietnam. Our fresh young co... |
 |
Looking for Vietnamese green seedless lime exporter | 卖方: Song Nam ITD Co., Ltd | Song Nam is one of the best exporter of green seedless lime in Vietnam. With the long term cooper... |
 |
Song Nam export Vietnamese dragon fruit | 卖方: Song Nam ITD Co., Ltd | Song Nam ITD has grown up from dragon fruit farmer families, so we understand all procedures from... |
 |
匈牙利-自增压液氮罐-液氮容器价格 | 卖方: 河南天之道生物科技有限公司 | 液氮作为现代科研与工业领域的关键冷却介质，其存储与供给方式直接影响实验与生产的效率与安全性。为此，我们精心设计了液氮供应罐系列，旨在为用户提供一个高效、安全、可靠的低温存储解决方案。 液氮供应罐... |
 |
Casting wax used for golf head manufacturing | 卖方: Syntop chemical Co.,Ltd. | Casting wax is mainly used in the field of aviation industry, civil precision casting, but also i... |
