AG-27 Magnetic Cylinder Sensor
AG-27 series magnetic sensor
The AG-27 series is suitable for all 4φC-slot cylinders on the market. The unique rotor screw enhances the tightness of the combination with the cylinder, and can withstand 5kgF tension without loosening; the installation method directly placed above the groove can be used. saves a lot of loading and unloading time.
Specification of AG-27 Magnetic Cylinder Sensor
|
Model |
AG-27DF |
AG-27N |
AG-27P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～200 mA |
|
|
Switch Rating |
6 W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ2.2, 2C, Grey Oil-Resistant PUR |
Φ2.2, 3C, Grey Oil-Resistant PUR |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
5000Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (BJ-R200810105A-01) |
IP68 (BJ-R200810105A-01) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
ALIF Technology provides alif sensor, hydraulic cylinder position sensors, sensor hydraulic cylinder, magnetic position sensor for hydraulic cylinder, hydraulic cylinder magnetic sensor, hydraulic cylinder sensor, hydraulic cylinder position sensor,
pneumatic magnetic sensor, etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Sensor Clamp | The length of the steel belt can be adjusted. The appropriate steel belt length can be selected according to the size of the cylinder bore. Firml... |
 |
AG-27 Magnetic Cylinder Sensor | AG-27 series hydraulic cylinder position sensors The AG-27 magnetic position sensor for hydraulic cylinderseries is suitable for all 4φC-slo... |
 |
PBN Sensor Clamp | Special for DFGH/DFGG series, PBN Clamp is fixed on full bore Round cylinder. Specification of PBN Clamp in Sensor Brand ALIF ... |
 |
AG-09 Magnetic Cylinder Sensor | AG-09 series switch magnetic sensor The new AG-09 series is suitable for AIRTAC 7.1*3.2 L-slot cylinder and can replace AIRTAC DS1-J. The casing... |
 |
DFGJ Magnetic Cylinder Sensor | DFGJ series magnetic sensor DFGJ series L-slot cylinder specially used for AIRTAC 7.1*3.2, which can replace AIRTAC DS1-J; avoid equipment colli... |
