.

PCD & PCBN

E-Grind supplies the whole range of and PCDN blanks for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanksprovide high wearing resistance ability and high finishing surface.

Application of PCD Blanks

Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.

Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...

Nonmetallic materials: ceramics, plastic, rubber, chipboard...

PCD disc

Product

Diamond Content (Vol%)

Product Properties

Application

ET02

≥92

Very good electrical discharge machining, general life, better heat resistance and impact resistance.

Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc.

ET05

≥92

Very good electrical discharge machining, general life, better heat resistance and impact resistance.

Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc.

ET10

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc.

ET25

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc.

ET35

≥95

Good electrical discharge machining, very long life, good heat resistance and impact resistance.

Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials.

ET302

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc.

Available specification

Grain size

Application

Grade

Diameter

Total thickness

DIamond table thickness

Woodworking

Metalworking

Conductive

Ultra-fine micron structure for excellent surface finish requirements,

ET085

45

55

2μm

For good surface finishing

ET02

45

55

5μm

ET05

45

10μm

General purpose, balance cutting efficiency and life

ET10

45

55

25μm

Good wear resistance production,for high Si% Al alloy.

ET25

45

55

302μm

ET302

45

55

35μm

ET35

45

55

PCBN (Polycrystalline Cubic Boron Nitride)

PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.

Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...

E-Grind provides two series of PCBN:

1) Solid CBN

2) CBN with Tungsten Carbide supporting.

PCBN and SBN Grade

Grade

CBN grit (μm)

CBN content (Vol%)

Processing way

Application

SBN95Z1 PCBN95Z1

20、30

Continuous cutting with large stock removal

For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy.

SBN90Z PCBN90Z

10、15

Continuous cutting with large stock removal

For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc.

SBN90Z2 PCBN90Z2

10、15

Continuous cutting with large stock removal

For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50.

SBN80G

3、5

Continuous cutting with Medium stock removal

For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50.

SBN70G PCBN70G

3、5

Continuous cutting with small stock removal

For finishing the chilled steel and high temperature alloy with HRC45-55.

SBN60G

1、3

Continuous cutting with small stock removal

For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS.

SBN55G1 PCBN55G1

1、3

Slight non-continuous and continuous cutting with small stock removal

For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS.

PCBN Blanks

Available specifications

SPEC

D(Diameter) (mm)

T(Thickness)(mm)

t (CBN section thickness)(mm)

PCBN55G1

PCBN70G

PCBN90Z

PCBN90Z2

PCBN95Z1

Ф45×1.2×0.6

45

Ф45×1.6×1.0

45

Ф45×3.2×1.0

45

Ф45×3.8×1.0

45

Ф45×4.5×1.0

45

As a superabrasive ltd, we can offer kinds of diamond diesfor sale, anything you need, please leave us a message.



在线联系供应商

至: Henan E-Grind Abrasives Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

CBN Powder
CBN Powder The cubic boron nitride has a molecular formula of BN. Its atomic structure is similar to the structure of carbon atoms in diamond. Therefore, it h...
CBN Powder
CBN Powder PCDmaterialfor Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. O...
Metal Bond Mesh Diamond
Metal Bond Mesh Diamond E-Grind's metal bond mesh diamondcombines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electro...
PCD & PCBN
PCD & PCBN E-Grind supplies the whole range of PCD blanks and PCD PCDNfor cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available c...
CBN Powder
CBN Powder E-Grind China Abrasivesis professional in diamond powdersand CBN products with over 50 years experience. We provide the full range of grit products...
供应产品

Same products

10000L Bright Beer Tank
10000L Bright Beer Tank 卖方: 山东汇冠工程装备有限公司 10000L Bright Beer Tank is often also called serving tank, tax determination tanks or clear beer ...
2000L Fermentation Tank
2000L Fermentation Tank 卖方: 山东汇冠工程装备有限公司 2000L Fermentation Tank is a Modular cylindrically-conical tank consist of a base tank (BT) and e...
300CPH(5CPM) Semi-Auto Beer Canning Machine
300CPH(5CPM) Semi-Auto Beer Canning Machine 卖方: 山东汇冠工程装备有限公司 300CPH(5CPM) Semi-Auto Beer Canning Machine is specifically designed to beer filling and include ...
2000L 2 Vessel Copper Beer Brewing Equipment
2000L 2 Vessel Copper Beer Brewing Equipment 卖方: 山东汇冠工程装备有限公司 2000L 2 Vessel Copper Beer Brewing Equipment , Copper has the highest heat conductivity, is easy ...
1000L 3 Vessel Beer Brewing Equipment
1000L 3 Vessel Beer Brewing Equipment 卖方: 山东汇冠工程装备有限公司 1000L 3 Vessel Beer Brewing Equipment is a brewery for restaurants, commecial and industrial brew...