.

PCD & PCBN

PCDPCBN

E-Grind supplies the whole range of PCD blanks and PCDN blanks for cutting tool purpose. The largest Diameter of PCD cutting tool blanksand PCDN cutting toolsblanks available can be 55mm. Our PCD metalblanks and PCDN blanks provide high wearing resistance ability and high finishing surface.

Application of PCD Blanks

Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCDproducts. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.

Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...

Nonmetallic materials: ceramics, plastic, rubber, chipboard...

PCD disc

Product

Diamond Content (Vol%)

Product Properties

Application

ET02

≥92

Very good electrical discharge machining, general life, better heat resistance and impact resistance.

Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc.

ET05

≥92

Very good electrical discharge machining, general life, better heat resistance and impact resistance.

Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc.

ET10

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc.

ET25

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc.

ET35

≥95

Good electrical discharge machining, very long life, good heat resistance and impact resistance.

Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials.

ET302

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc.

Available specification

Grain size

Application

Grade

Diameter

Total thickness

DIamond table thickness

Woodworking

Metalworking

Conductive

Ultra-fine micron structure for excellent surface finish requirements,

ET085

45

55

2μm

For good surface finishing

ET02

45

55

5μm

ET05

45

10μm

General purpose, balance cutting efficiency and life

ET10

45

55

25μm

Good wear resistance production,for high Si% Al alloy.

ET25

45

55

302μm

ET302

45

55

35μm

ET35

45

55

PCBN (Polycrystalline Cubic Boron Nitride)

PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.

Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...

E-Grind provides two series of PCBN:

1) Solid CBN

2) CBN with Tungsten Carbide supporting.

PCBN and SBN Grade

Grade

CBN grit (μm)

CBN content (Vol%)

Processing way

Application

SBN95Z1 PCBN95Z1

20、30

Continuous cutting with large stock removal

For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy.

SBN90Z PCBN90Z

10、15

Continuous cutting with large stock removal

For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc.

SBN90Z2 PCBN90Z2

10、15

Continuous cutting with large stock removal

For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50.

SBN80G

3、5

Continuous cutting with Medium stock removal

For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50.

SBN70G PCBN70G

3、5

Continuous cutting with small stock removal

For finishing the chilled steel and high temperature alloy with HRC45-55.

SBN60G

1、3

Continuous cutting with small stock removal

For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS.

SBN55G1 PCBN55G1

1、3

Slight non-continuous and continuous cutting with small stock removal

For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS.

If you want to know more about material pcdand pcbn material, please visit our website.

As one of abrasive powder suppliers, we can provide kinds of diamond powdersfor sale, if you are interested, please contact us.



在线联系供应商

至: Henan E-Grind Abrasives Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

CBN Powder
CBN Powder Metal Bond Diamond Micron Powder Our metal bond micron products offer good Roughing, Lapping and finishing result. For resin bond, vitrified bond,...
Metal Bond Micron Diamond
Metal Bond Micron Diamond What Is Diamond Powder? Metal Bond Micron Diamond E-Grind's metal bond micron diamondproducts offer good Roughing, Lapping and finishing resu...
Metal Bond Micron Diamond
Metal Bond Micron Diamond Our metal micron diamond powder products offer good Roughing, Lapping and finishing result. For resin bond, vitrified bond, and electroplated bond...
Coated Diamonds / CBN
Coated Diamonds / CBN E-Grind China Abrasivesis professional in diamond powdersand CBN products with over 50 years experience. We provide the full range of grit products...
TSP(Thermally Stable Polycrystalline Diamond)
TSP(Thermally Stable Polycrystalline Diamond) TSP diamondis made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resista...
供应产品

Same products

Aluminum Oxide Fiber Disc
Aluminum Oxide Fiber Disc 卖方: CHANGZHOU RMN ABRASIVES CO., LTD Aluminum Oxide Fiber Disc It is strong and has durable, long sanding life, high sanding performa...
AJ26M Abrasive Belts for Metal
AJ26M Abrasive Belts for Metal 卖方: CHANGZHOU RMN ABRASIVES CO., LTD AJ26M Abrasive Belts for Metal RMC AJ26M abrasive belts for metal backing is Jwt flexible and hi...
AJ25 Aluminium Oxide Abrasive Belts
AJ25 Aluminium Oxide Abrasive Belts 卖方: CHANGZHOU RMN ABRASIVES CO., LTD AJ25 Aluminium Oxide Abrasive Belts The backing cloth make anti-slip treatment with high strengt...
AF37M Green Abrasive Film
AF37M Green Abrasive Film 卖方: CHANGZHOU RMN ABRASIVES CO., LTD RMC AF37M green abrasive microfinishing filmcan be used as Velcro and PSA disc, and also suitable...
Abrasive Paper
Abrasive Paper 卖方: CHANGZHOU RMN ABRASIVES CO., LTD Abrasive Paper Shop roll abrasive paperAP33M is a special product suitable for fast sanding. Pre...