Contact heating and cooling tester STD-F7
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The sensation of coldness or warmth when skin touches a fabric is referred to as the "coldness and warmth feeling." The feeling of coldness or warmth will vary depending on the amount of heat transferred from the skin to the fabric. This device measures that feeling by evaluating the "qma" value (peak heat flux).
Test standard
JIS L 1927Textiles-Measurement method of cool touch feeling property
GB/T 35263-2017Textiles-Testing and evaluation for cool sensation at contact instant
CNS15687. L3272Method of test for the instantaneous cool sensation fabrics
The Thermo Labo can be used to evaluate such products as bedding material meant to offer a feeling of coldness in summer, and underwear material meant to offer contact warmth in winter.
Features
A design that mimics the sensation of actually touching an object
The load and contact area of the heat plate, which is brought into contact with the target sample, is designed to imitate the sensation of touching an object by hand, allowing for more realistic measurements of maximum heat transfer amounts.
Also measure thermal conductivity and heat retention properties (with optional accessories)
Thermal conductivity
With constant thermal conductivity measurement, the ease at which heat is transmitted from a heat plate with a constant temperature (30℃) through a sample to a heat plate with a separate constant temperature (20℃).
Heat retention properties (optional accessory)
The sample is set on a heat plate with a constant temperature (room temperature +10℃) and is left in contact with the air. A constant wind is then applied continuously to the sample surface. The amount of heat lost through the sample is then measured in order to calculate the heat retention rate (%). Measuring methods include a dry method that assumes direct contact is made with dry skin or clothing and a wet method that assumes contact is made with sweaty skin or clothing.
Specification
| Dimensions (W×D×H) approx. | Thermo Labo: 230×360×80 mm Amplifier: 180×400×400 mm Thermo Cool: 180×180×110 mm Thermo Cool Amplifier: 230×310×220 mm Wind Tunnel Unit (optional): 460×320×1100 mm Wind Tunnel Amplifier (optional): 125×200×100 mm |
| Weight approx. | Thermo Labo: 3 kg Amplifier: 15 kg Thermo Cool: 2.5 kg Thermo Cool Amplifier: 5 kg Wind Tunnel Unit (optional): 7 kg Wind Tunnel Amplifier (optional): 1.3 kg |
| Power supply, Frequency | 100VAC, 50/60Hz |
| Interface | USBADPU (optional) PC (optional)*1 Data logger output terminal |
| OS | Windows 7/8/8.1/10 |
| Sample size | 180×180 mm (standard) Thickness: 2 mm (max.) |
在线联系供应商
Other supplier products
 |
Falling Sand Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ... |
 |
Single Wire Cable Burning Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Single Wire Cable Burning Tester is a precision flammability test system designed to as... |
 |
Crash Test Dummy (Chinese Anthropometric Data) | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Crash Test Dummy is designed based on Chinese anthropometric data and represents an ave... |
 |
Water Leakage Sensor | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description GB/T 21619-2008 Test Methods for Dangerous Goods Flammable Solids Emit... |
 |
Electric pencil hardness meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: This machine is suitable for all kinds of finished product spray har... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | 卖方: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | 卖方: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | 卖方: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | 卖方: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | 卖方: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
