50HL-100HL / 50BBL-100BBL Craft Brewery Project
General descriptionof :
with bigger volume capacity is more prepared for industry breweries, we focus more on how to make the whole turnkey project finished and make it running for continuous brewing production.
The min production output could be starting from 4 brews till 12 brews per day. ZYBREW supply the service starting from project evaluation, recipe development, cost-effective analysis, market research, to equipment fabrication and commissioning etc. There is accurate calculation on energy consumption , material to make sure the whole plant running under the most cost-effective condition.
Featuresof :
Higher wort wort extract, Lower energy cost and material consumption
Fully automated brewery control for temp, water, beer etc, with production record report.
Well designed steam system to increase heating efficiency and lower energy lost,
Well configured with hops dosing plant, energy recovery plant, auto grain out system
Bottom mash inlet from lauter tun, well designed filter plant and wort collection unit
Internal heater for separate kettle, working with cylinder and bottom jacket for better boiling effect. Can be fore boiling under pressure which is more suitable for higher altitude place.
Adjust cooker for using other ingredients like rice, corn etc can be an option
Separate buffer tank for increasing brewing efficiency.
The while cellar plant for beer fermentation, storage etc, with catwalks, manifold or piping corridor for beer, CO2, air, CIP etc.
Cooling unit for current use and well prepared for future expanding
Automation system with curve indication and production record printing, with recipe storage function, clients can create new recipe as the exact production requirement.
ZYBREW can help with solution of package line
Basic configurationabout :
The whole grain milling unit from outdoor silo to inside mill, hopper, premasher etc
Brewhouse: Four or Five vessels, the whole brewhouse unit, optional rice cooker
Cellar: Fermenter, storage tank and BBTs, for fermentation of different kinds of beer, all assembled and isolated, With cat walks or manifold.
Cooling: Chiller connected with glycol tank for cooling, Ice water tank and plat cooler for wort cooling
CIP: Fixed CIP station
Filtration: Diatomite filtration, membrane filter, Plate frame filtration unit etc.
在线联系供应商
Other supplier products
 |
1000L Three Vessel Brew House | 1000L Three Vessel Brew House Capacity: 1000L Model: ZY-BH-1000L Material: AISI 304 SS/316 SS/Copper Heating method: Steam heating(Preferred) ... |
 |
Horizontal Beer Storage Tank | Feature Description: The mainly for beer storage, which can be stacked with 2-3 tanks, to make full use of the height. Fermentation finished in sh... |
 |
200L Brew House | 200L Brew House Capacity: 200L Model: ZY-BH-200L Material: AISI 304SS/316SS Heating method: Electric Heating Basic configuration: Mash/lauter ... |
 |
Micro brewery equipment 1000l beer brewing equipment | Micro brewery equipment1000l beer brewing equipment Capacity: 1000L Model: ZY-BH-1000L Material: AISI 304 SS/316 SS/Copper Heating method: Steam he... |
 |
50HL 4 Vessel Brew House | 50HL 4 Vessel Brew House Capacity: 50HL Model: ZY-BH-50HL Material: AISI 304 SS/316 SS/Copper Heating method: Steam heating(Preferred) Basic c... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
