Pulling Type Paddle Mixer
The pulling type paddle mixer machineis mainly used for anti-cracking mortar, thermal insulation mortar, bonding mortar, plastering mortar, floor mortar and other dry powder mortars with high mixing uniformity and high-grade putty powder. Concrete admixtures, feeds, chemical powders, food flavors and other industries have also been greatly applied, and it is not suitable for the mixing of raw materials with a particularly large amount of spray and particularly large viscosity of materials.
Product Description of Pulling Type Paddle Mixer Machine
Pulling type paddle mixer machine is widely used for drying and mixing of dry powder mortar, chemical, pesticide, detergent, pigment food, monosodium glutamate, milk powder, salt, feed, chemicals, ceramics, plastics, rubber additives, and other powders.
Pulling type paddle mixer machine is also called a non-gravity door open type mixer. Based on the long-term practice in the field of mixers, the equipment overcomes the shortcomings of horizontal mixer cleaning and uses gear reduction gearbox and mixer rotor direct connection transmission for higher reliability and longer service life.
Structural Characteristics of Pulling Type Paddle Mixer Machine
The right end surface of the pulling type paddle mixer machine body is provided with a non-drive endplate, the left end is provided with a drive endplate, the lower end of the drive end plate is disposed inside the track, and the motor reducer and the rotor shaft are respectively provided with two, the left end of the rotor shaft and the output end of the motor reducer is connected and connected, and the rotor shaft is assembled inside the mixer body through the driving endplate. The rotor shaft is symmetrically arranged inside the mixer body, the blade is assembled on the rotor shaft, and the track is arranged on the lower side of the mixer body. The lower end opens a discharge door, and a shaft seal is arranged at a connection between the rotor shaft and the output end of the motor reducer.
The Pulling type paddle mixer machine is a new high-efficiency material mixer independently developed and designed by the Neil mechanical design team based on the twin-blade gravity-free mixer. This model maintains the advantages of the previous generation double-mix mixer. On the basis of the design of the side-opening door, the cleaning efficiency and mixing speed are greatly improved, the mixing time is shortened, and the production efficiency is greatly improved.
Application of Pulling Type Paddle Mixer
Dry mortar
Chemicals, chemicals, detergents,
Feed, pesticides,
Pigment food, monosodium glutamate, milk powder, salt
Ceramic, plastic, rubber additives
Main Features of Pulling Type Paddle Mixer
(1) Easy to clean, side-opening door design makes machine cleaning more convenient and saves production time
(2) The rotation speed of the shaft driven by the reducer and the structure of the blade will weaken the gravity of the material. With the lack of gravity, the difference in particle size and a specific gravity of each material is neglected during the mixing process.
(3) The intense mixing movement shortens the mixing time, which is faster and more efficient.
(4) Even if the material has a difference in specific gravity and particle size, a good mixing effect can be achieved under the rapid and vigorous tumbling of the staggered stirring blades.
Technical Data of Pulling Type Paddle Mixer
|
Technical Data |
||||||
|
Model no. |
Effective Vol |
Loading ratio |
Power |
Speed |
Dimension (mm) |
Weight |
|
NCL-300 |
300L |
4KW |
53r/min |
3240X1035X1430 |
580kg |
|
|
NCL-500 |
500L |
53r/min |
3390X1160X1480 |
860kg |
||
|
NCL-1000 |
1000L |
11KW |
45r/min |
3590X1380X1630 |
1530kg |
|
|
NCL-1500 |
1500L |
15KW |
45r/min |
3880X1550X1810 |
1980kg |
|
|
NCL-2000 |
2000L |
39r/min |
4180X1780X1930 |
2590kg |
||
|
NCL-3000 |
3000L |
22KW |
31r/min |
4430X1910X2040 |
3620kg |
|
|
Power supply |
AC 3 Phase 208-415V 50/60HZ |
|||||
Our company provides paddle type mixer,horizontal powder mixer,paddle mixer design,horizontal paddle mixer,paddle mixers for saleand bulk powder transport,RFQ today.
在线联系供应商
Other supplier products
 |
Powder Mixer Machine | Powder mixer machineis a mechanical device that uniformly mixes two or more materials by mechanical force, gravity, and the like. In the process of... |
 |
Powder Mixer Machine | Powder mixer machine is a mechanical device that uniformly mixes two or more materials by mechanical force, gravity, and the like. In the process o... |
 |
Laboratory Mixer Machine | The laboratory mixer machine automatically performs all movements such as clamping, rotation, and mixing. Equipped with a series of automatic lifti... |
 |
Laboratory Mixer Machine | The mixer for laboratoryautomatically performs all movements such as clamping, rotation, and mixing. Equipped with a series of automatic lifting mi... |
 |
Semi Automatic Filling Machine | This type of semi automatic pouch filling machinecan complete the measurement, filling and the like, and is suitable for measuring powdery and gran... |
Same products
 |
GT-JYH12 热流道CNC数控缩管机 | 卖方: 肇庆古雷特科技有限公司 | 产品说明 GT-JYH12 热流道CNC数控缩管机，主要用于热流道加热器、小型加热器的缩管加工。 主要参数 缩后直径：1.2–6mm 缩前最大直径：9mm ... |
 |
GT-JY18 18 段缩管机 | 卖方: 肇庆古雷特科技有限公司 | 产品说明 GT-JY18 型 18段缩管机是一款常用的管状加热器缩管设备，采用整体式铸铁床身。由于铸铁整体床身刚性好、强度高，不易变形，可保障设备长期稳定运行。 主要参数 ... |
 |
Multiple Blades Digital Label Cutter VR350 | 卖方: WILLIAM CNC TECHNOLOGY | Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq... |
 |
Digital Label Die Cutting Machine VR240X | 卖方: WILLIAM CNC TECHNOLOGY | Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th... |
 |
Rotary die cutting machine VR320 | 卖方: WILLIAM CNC TECHNOLOGY | Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ... |
