Pulse Jet Dust Collector
This pulse jet dust collectoris a new type of dust collector developed on the basis of our company's first generation dust collector. The stainless steel casing is thicker and the round design makes this duster have lower noise and beautiful appearance. The Teflon filter is wrapped around the bottom of the machine, and the overall dust removal efficiency is significantly higher than that of the first generation dust collector.
Product Description of Pulse Jet Dust Collector
The new type pulse jet type dust collectoris an air purification device with small volume and high dust removal efficiency. Suitable for a variety of independent dust-producing points, flexible and convenient, on-site dust collection, on-site treatment, can effectively ensure the cleanliness of the air.
The basic structure consists of a dust box, a centrifugal fan, a filter bag (filter cartridge), a pulse type dust collector and a microcomputer controller. The dust is sucked into the interior of the dust collector box by the negative pressure of the fan through the suction pipe, using gravity and upward airflow. The coarse-grained dust is directly filtered by the filter and directly dropped to the dust collector. The particulate dust is trapped on the outer surface by the filter, and the clean gas is filtered and decomposed and purified by the filter element, and then flows into the cleanroom, thereby being discharged from the air outlet by the fan. The entire dust removal filtration process is the result of a combination of gravity, inertial force, collision, electrostatic adsorption, and sieving.
Working Principle of Pulse Jet Dust Collector
The dusty air enters the tank through the air inlet, and the coarser dust falls down to the ash drawer under the action of its own gravity. The other part of the fine dust is sucked on the outer wall of the filter cartridge and cleaned under the suction of the main fan. The air through the filter cartridge is discharged through the fan outlet. Can be directly discharged indoors for recycling. As the filtration conditions continue, the dust adsorbed on the surface of the filter cartridge is increasing. In order to ensure the normal operation of the system, the resistance of the precipitator should be maintained within the limit (1.2KPa), so the cleaning is performed by high frequency vibration. , complete the recycling of the filter cartridge.
Application of Pulse Jet Dust Collector
A grinding machine, etc
Food industry
Chemical Industry
Pharmaceutical industry
Commodity industry
Production line dust collect
Main Features of Pulse Jet Dust Collector
Exquisite design, stainless steel, manufactured according to food-grade industry standards
Compact structure and small footprint
Sub-micron filtration, high purification efficiency
Easy maintenance and small workload
Can be used with a variety of dust-designed production line equipment for a wide range of applications
Technical Data of Pulse Jet Dust Collector
|
Technical data |
||||||
|
Model |
NCC-1.5 |
NCC-2.2 |
NCC-3.0 |
NCC-4.0 |
NCC-5.0 |
NCC-7.5 |
|
Blowing rate(m³) |
780-1070 |
1360-1680 |
1730-2420 |
2680-3590 |
3830-4580 |
4850-7050 |
|
Pressure(Pa) |
950-700 |
970-590 |
1690-1120 |
1690-1120 |
1690-1120 |
1690-1120 |
|
Power(kw) |
||||||
|
Max noise(DB) |
55 |
60 |
65 |
65 |
70 |
70 |
|
Dedusting rate(%) |
||||||
|
Dimension(⌀*H)(mm) |
⌀650*1620 |
⌀680*1740 |
⌀720*1810 |
⌀780*1880 |
⌀850*1970 |
⌀890*1020 |
|
Total weight(kg) |
110 |
150 |
180 |
240 |
350 |
460 |
|
Filter |
Teflon |
Teflon |
Teflon |
Teflon |
Teflon |
Teflon |
|
Power supply |
3 Phase 220V-400V 50HZ |
|||||
We provide pulse jet dust collector working principle,dust collector pulse jet system,pulse jet cleaning systemand powder handling and processing,RFQ today.
在线联系供应商
Other supplier products
 |
Pulling Type Paddle Mixer | The pulling type paddle mixer machineis mainly used for anti-cracking mortar, thermal insulation mortar, bonding mortar, plastering mortar, floor m... |
 |
Bucket Elevator | Do you want to buy Bucket Elevator? The mini bucket elevatoris suitable for lifting from a low place to a high place. After the material is supplie... |
 |
Powder Mixer Machine | Powder mixer machineis a mechanical device that uniformly mixes two or more materials by mechanical force, gravity, and the like. In the process of... |
 |
Bucket Elevator | The bucket elevator is suitable for lifting from a low place to a high place. After the material is supplied to the hopper through the vibrating ta... |
 |
Post Lifting Bin Mixer | The post lifting bin mixer can automatically complete the functions of lifting, mixing and lowering, and is ideal mixing equipment for the solid pr... |
Same products
 |
XD-MAX Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
